When you get a Call Waiting call, the phone sounds a tone and displays any CID information received for the waiting call.
To answer a Call Waiting call, press flash on the base or Talk/ flash on a handset. The phone company automatically puts the current call on hold and switches you to the waiting call.
Use Flash and Talk/flash to switch between the two calls; remember, each time you switch, there is a short pause before you're connected to the other caller.
Finding a Lost Handset
With the phone in standby, press Intercom/hold on the base. Select the handset you want to find, or select All to page all handsets at the same time. The paged handset(s) will beep for 1 minute or until you press Intercom/hold again or press Talk/flash followed by End on the handset.
Using an Optional Headset
You can use a standard 2.5 mm telephone headset with your cordless handsets. To purchase headsets, contact the Parts Department (see the front cover).
To install a headset, remove the headset
jack cover and insert the headset plug into | (Belt clip | |
the jack. | ||
hole) | ||
Just make and receive calls as usual, and |
|
use your headset to talk to the caller after the call connects.
When you connect a headset, the handset automatically mutes the earpiece and speaker. To
25