Sony DCR-PC5 manual 108

Superimposing a still picture in the “Memory Stick” on a moving picture

– MEMORY MIX

Before operation

Insert a mini DV tape and a recorded “Memory Stick” into your camcorder.

(1) Set the POWER switch to CAMERA.

(2) In the standby mode, press FN to display PAGE1 (p. 16).

(3) Press MEM MIX. The last recorded or last composed image appears on the lower part of the screen as a thumbnail image.

(4) Press –/+ on the right lower corner of the screen or the Remote Commander to select the still picture which you want to superimpose.

–: to see the previous image +: to see the next image

(5) Press a desired mode. The still picture is superimposed on the moving picture.

(6) Press –/+ on the left lower corner of the screen to adjust the effect, then press OK to return to PAGE1.

(7) Press EXIT to return to FN.

(8) Press START/STOP to start recording.

1	POWER	LOCK
VCR
CAMERA OFF	MEMORY

3

MEM

M I X

MEM MIX
	OFF	MCCAM	OVER–	OK
		LUM I	LAP
	CAMCM	MCCAM			Still picture
	CHROM	CHROM

100–0001

– +

2
	4,5
					OFF			OK
				MEM MIX
FN
		–	+	M. LUMI			100–0001
				–		+	–	+
	6
				MEM MIX
					OFF			OK
		–	+	M. LUMI
							100–0001
				–		+	–	+

108