–Tape photo recording ( 
TRV270E/285E)
You can record still images. Before recording, follow steps 1 to 7 in “Getting started” (p. 11 - p. 19).
OPEN PHOTO
POWER switch
1 Remove the lens cap. Pull the lens cap string down and attach it to the grip belt.
3 Slide the POWER switch to select the CAMERA mode.
Slide the POWER switch while pressing the green button.
4 Press and hold PHOTO lightly.
You will hear a small beep sound, and the | Recording | ||
60min | CAPTURE | The indicator | |
picture will become a still image. Recording does not start at this point.
appears.
5 Press PHOTO fully.
A shutter sound is heard, and the image is recorded with sound for 7 seconds.
The still image is displayed on the screen until recording is completed.
2 Press OPEN and open the LCD panel.
To turn the power off
Slide the POWER switch up to (CHG) OFF.
bNote
•
appears when the tape photo recording does not work.
zTip
•You can record about 510 images in the SP mode and about 765 images in the LP mode on a tape which can record for 60 minutes in the SP mode.
Recording 25