8 Press the SEL/PUSH EXEC dial.

The ending point of the first program is set, and the lower part of the program mark changes to light blue.

VIDEO EDIT

0:09:07:06

MARK

 

2

IN

UNDO

 

 

 

ERASE ALL

 

START

 

 

 

EDIT SET

 

TOTAL

0:00:12:00

 

SCENE 1 [MENU] : END

9 Repeat steps 5 to 8 and create programs.

10Set your VCR to the recording pause.

Skip this step if your camcorder is connected via an i.LINK cable.

11Turn the SEL/PUSH EXEC dial to select [START], then press the dial.

VIDEO EDIT

0:09:07:06

MARK

 

ENGAGE

UNDO

 

REC PAUSE

ERASE ALL

 

RETURN

START

 

EDIT SET

 

EXECUTE

TOTAL 0:00:12:00

SCENE 1 [MENU] : END

12Turn the SEL/PUSH EXEC dial to select [EXECUTE], then press the dial.

A search for the beginning of the first program starts, then the recording starts. [SEARCH] appears during search and [EDITING] appears during editing.

V I DEO

ED I T

0:00:06:00

EDITING

 

SCENE

1 / 1

 

[ ] : CANCEL

[MENU] : END

 

 

 

When a program is recorded, the program mark stops flashing and remains lit. When all programs have been recorded, the program editing operation stops automatically.

To cancel recording, press (stop).

To end Digital program editing

Press MENU.

To save a program without using it to record

Press MENU in step 11.

The program is stored in memory until the cassette is ejected.

To erase programs

1Follow steps 1 to 4 in “Recording the selected scenes as programs” (p. 70).

2Turn the SEL/PUSH EXEC dial to select [UNDO] or [ERASE ALL], then press the dial.

When you select [UNDO]

You can erase the last set program.

When you select [ERASE ALL]

You can erase all the programs.

3Turn the SEL/PUSH EXEC dial to select [EXECUTE], then press the dial.

The programs are deleted. To cancel this operation, select [RETURN], and then press the dial.

bNotes

•You cannot set starting point or ending point on a blank section of the tape. If there is a blank section, the total time may not appear correctly.

•When you cannot operate the device correctly using an i.LINK cable connection, select [IR] in step 9 on p. 68, and set the [IR SETUP] code.

Dubbing/Editing

Dubbing/Editing 71