2 Prepare your VCR.

•Insert a cassette for recording.

•Set the input selector to input mode, if your VCR has one.

3 Prepare your camcorder (playing device).

•Insert a cassette for editing.

•Slide the POWER switch repeatedly to select the PLAY/EDIT mode.

4 Press MENU.

5 Turn the SEL/PUSH EXEC dial to select (OTHERS), then press the dial.

6 Turn the SEL/PUSH EXEC dial to select [VIDEO EDIT], then press the dial.

VIDEO EDIT

0:08:55:06

MARK

 

1

IN

UNDO

 

 

 

ERASE ALL

 

START

 

 

 

EDIT SET

 

TOTAL

0:00:00:00

 

SCENE

0

 

 

[MENU] : END

9 Turn the SEL/PUSH EXEC dial to select [i.LINK] or [IR], then press the dial.

When connecting with an i.LINK cable

After selecting [i.LINK], go on to “Step 2: Adjusting the synchronization of the VCR” (p. 69).

When connecting with an A/V connecting cable

After selecting [IR], follow the procedure described in “To set the [IR SETUP] code” (p. 68).

To set the [IR SETUP] code

When you connect with an A/V connecting cable, you need to check the [IR SETUP] code signal to see if your VCR can be operated by your camcorder (infrared ray emitter).

Remote sensor

VCR

Infrared ray emitter

7 Turn the SEL/PUSH EXEC dial to select [EDIT SET], then press the dial.

VIDEO EDIT

0:08:55:06

EDIT SET

IR

 

CONTROL

ADJ TEST ”CUT–IN” ”CUT–OUT”

IR SETUP PAUSEMODE IR TEST

RETURN

[MENU] : END

8 Turn the SEL/PUSH EXEC dial to select [CONTROL], then press the dial.

VIDEO EDIT

0:08:55:06

EDIT SET

 

 

 

 

CONTROL

 

IR

 

[MENU] : END

 

i. LINK

 

 

 

 

 

 

 

 

 

1Turn the SEL/PUSH EXEC dial to select [IR SETUP], then press the dial.

2Turn the SEL/PUSH EXEC dial to select the [IR SETUP] code of your VCR, then press the dial.

For the [IR SETUP] code of your VCR, refer to “[IR SETUP] code list” (p. 64). When there is more than one code listed for the manufacturer of your VCR, try each code and find the most appropriate one.

3Turn the SEL/PUSH EXEC dial to select [PAUSEMODE], then press the dial.

4Turn the SEL/PUSH EXEC dial to select the mode to cancel recording pause on the VCR, then press the dial.

Refer to the operating instructions supplied with your VCR for details on operation.

68Dubbing/Editing