bNotes

•There may be a discrepancy of several seconds between the time code and the tape counter.

•Zero set memory will not function correctly if there is a blank section between recorded sections on the tape.

Searching for a scene by date of recording – Date search

You can locate the point where the recording date changes.

SEARCH M.

. / >

STOP

1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.

2 Press SEARCH M. on the Remote Commander repeatedly to select [DATE SEARCH].

3 Press . (previous)/> (next) on the Remote Commander to select a recording date.

Playback starts automatically from the point where the date changes.

Each time you press the button, the previous or the next date will be searched for and displayed.

To cancel the operation

Press STOP on the Remote Commander.

bNotes

•If one day’s recording is less than 2 minutes, your camcorder may not accurately find the point where the recording date changes.

•The Date search will not function correctly when there is a blank section between recorded sections on the tape.

Searching for a still image

– Photo search

You can locate the still image you have recorded on a tape.

SEARCH M.

. / >

STOP

1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.

2 Press SEARCH M. on the Remote Commander repeatedly to select [PHOTO SEARCH].

3 Press . (previous)/> (next) on the Remote Commander to select the photo for playback.

Playback of the photo starts automatically. Each time you press the button, the previous or the next photo will be searched for and displayed.

To cancel the operation

Press STOP on the Remote Commander.

bNote

•If a tape has a blank section between recorded sections, the Photo search function may not work correctly.

40Playback