b Note
• Deleting anything other than [USB Composite Device], [USB Audio Device], and [USB Device] may cause malfunction of your computer.
cYou cannot start the simple operation settings while the USB cable is connected. Disconnect the USB cable from your camcorder first.
Click [Open]. Double-click [Driver]. Double-click [Setup.exe].
3
4
5
For copying and viewing pictures recorded on a tape
• [USB Composite Device] in the [Universal Serial Bus Controller] folder
• [USB Audio Device] in the [Sound, video and game controllers] folder
• [USB Device] in the [Other devices] folder
8 When the [Confirm Device Removal] screen appears, click [OK].
9 Turn off the power of your camcorder, disconnect the USB cable, then restart the computer.
10 Place the CD-ROM in the disc drive of your computer.
11 Follow the steps below and try to install the USB driver again.
1 Double-click [My Computer].
2 Right-click [PICTUREPACKAGE] (Disc drive)*.
* Drive names (such as (E:)) may vary depending on the computer.
Click [View], then click [Devices by type].
Click [Device Manager].
Click the [Hardware] tab.
4
5
6
7 If devices below are already installed, right-click them, then click [Uninstall] to delete them.
Check that your camcorder is connected to a computer. Click [Start].
1
2
3
Cause and/or Corrective Actions
For Windows XP Log on as Administrators.
Symptom
For 
TRV270E/285E:
The image does not appear on the screen of the Windows computer when using the USB cable. 
For 
TRV270E/285E:
[Cannot start Easy Handycam with USB connected] appears on the screen of your camcorder. 
90Troubleshooting