WRITING: The picture is being written onto the DVD.

zTip

•If you use a DVD-RW/+RW which has other data stored on it, the message [This is a recorded disc. Delete and overwrite?] appears on the LCD screen of your camcorder. When you press the SEL/PUSH EXEC dial, the existing data is erased and new data is written.

9 Press BURN DVD/VCD to finish creating a DVD.

The disc tray comes out automatically.

60min

0:00:00:00

BURN DVD

 

COMPLETED

 

C r e a t e a n o t h e r

c o p y ?

D i s c t r a y o p e n s .

[EXEC] :EXECUTE

[BURN DVD/VCD] : CANCEL

•You cannot operate your camcorder in the following situations:

–While playing back a tape

–When “Click to DVD” is started up from the computer

•You may not be able to create a DVD from an 8mm tape if it contains pictures recorded in a format other than Digital8 format.

To create another DVD with the same content, press the SEL/PUSH EXEC dial. The disc tray comes out. Place a new writable DVD in the disc drive. Then, repeat steps 8 and 9.

To cancel the operation

Press BURN DVD/VCD.

bNotes

•You cannot cancel the operation after [Finalizing DVD.] is displayed on the LCD screen of your camcorder.

•Do not disconnect the i.LINK cable or set the POWER switch to another mode on your camcorder until the picture is completely copied to the computer.

•The DVD is created even if you disconnect the i.LINK cable (optional) or turn off the power of your camcorder while [WRITING] or [CONVERTING] is displayed.

•When any of the following occurs, copying of the picture is canceled. A DVD containing the data up to the point the operation was canceled is created. Refer to the help files of “Click to DVD Automatic Mode Launcher” for details.

–When there is a blank portion of 10 seconds or longer on the tape.

–When the data of the tape contains a date before the recording date of the later images.

–When normal and wide size pictures are recorded on the same tape.

computer your with Using

Using with your computer 81