Step 1 Preparing the power supply

Connecting to a wall socket

When you use your camcorder for a long time, we recommend that you power it from a wall socket using the AC power adaptor.

(1) Open the DC IN jack cover, pulling the cover out a little and rotating it. Connect the AC power adaptor supplied with your camcorder to the DC IN jack on your camcorder with the plug’s v mark facing up.

(2) Connect the mains lead to the AC power adaptor.

(3) Connect the mains lead to a wall socket.

1

PRECAUTION

The set is not disconnected from the AC power source (wall socket) as long as it is connected to the wall socket, even if the set itself has been turned off.

Notes

•Place the AC power adaptor near a wall socket. While using the AC power adaptor, if any trouble occurs with this unit, disconnect the plug from the wall socket as soon as possible to cut off the power.

•The AC power adaptor can supply power even if the battery pack is attached to your camcorder.

•The DC IN jack has “source priority.” This means that the battery pack cannot supply any power if the mains lead is connected to the DC IN jack, even when the power cord is not plugged into a wall socket.

Using a car battery

Use Sony DC Adaptor/Charger (optional). Refer to the operating instractions of the DC Adaptor/Charger for further information.

Stap 1 Voorbereiden van de stroomvoorziening

Gebruik op stroom van hetlichtnet

Als u de camcorder geruime tijd achtereen wilt gebruiken, is het aanbevolen het apparaat op het lichtnet aan te sluiten via de bijgeleverde netspanningsadapter.

(1) Open het DC IN aansluitklepje en trek het klepje iets naar buiten. Sluit de bij uw camcorder geleverde netspanningsadapter aan op de DC IN gelijkstroomingang, met het

vdriehoekje van de stekker boven. (2) Sluit het netsnoer aan op de

netspanningsadapter.

(3) Steek de stekker van het netsnoer in het stopcontact.

2, 3

VOORZICHTIG

Zolang de stekker in het stopcontact zit, blijft de stroomtoevoer naar het apparaat intact, ook al is de camcorder zelf uitgeschakeld.

Opmerkingen

•Plaats de netspanningsadapter in de buurt van een goed bereikbaar stopcontact. Als er tijdens gebruik van de netspanningsadapter iets mis gaat, trekt u dan zo spoedig mogelijk de stekker uit het stopcontact.

•U kunt uw camcorder ook op stroom van de netspanningsadapter gebruiken wanneer er een batterijpak op de camcorder is aangesloten.

•De DC IN gelijkstroomingang heeft “voorrang”. Dat wil zeggen dat het batterijpak geen stroom kan leveren zolang het snoer van de netspanningsadapter is aangesloten op de DC IN aansluiting, ook al zit de stekker van de netspanningsadapter niet in het stopcontact.

Gebruik op stroom van een auto-accu Gebruik in de auto een Sony gelijkstroomadapter/batterij-lader (los verkrijgbaar). Zie voor nadere bijzonderheden de gebruiksaanwijzing van de gelijkstroomadapter/ batterij-lader.

Voorbereidingen started Getting

23