Inserting an SD card

Insert the SD card into the SD CARD slot until it fits into place.

Access indicator flashes

Insert it in the b

while the printer is

mark direction.

accessing the memory

 

card.

 

In the SD CARD slot of this printer, you can use the following media;
•SD Memory card
•MiniSD card (you need to use a miniSD card adaptor)
•MMC standard memory card
•RS-MMC card (you need to use an MMC adaptor)
To eject an SD card

Push the SD card lightly into the insertion slot. After it pops back out, remove it slowly.

Notes

•When you remove the SD card, make sure to hold it with your hands to prevent it from popping out and hitting your eye, as this may cause injuries.

•When you use a miniSD card, use a miniSD card adaptor. If you insert a miniSD card without the adaptor into a slot of the printer, you may not be able to remove it.

Connecting a camera or other external device

To print an image from a camera or other external device, connect it to the printer . You can connect an external device that supports mass storage system. For how to connect the PictBridge-compliant digital camera, see page 46.

Note

If a memory card is inserted in the printer, the printer cannot read the signal from an external device connected to the PictBridge connector of the printer. Remove the memory card, if any.

1 Set your digital camera or other external device ready for printing with the Mass Storage-compliant printer.

The settings and operations that are necessary before connection differ depending on the external device you use. For details, see the operating instructions of the external device. (In case of Sony Cyber-shot digital camera, for example, select “Normal” mode or “Mass Storage” mode for the “USB Connect”. )

2 Connect a camera or an external device to the PictBridge connector of the printer.

Use the USB cable supplied with the digital camera or other external device.
18 GB