3 Set the print paper into the tray. | 4 Remove the protective sheet. |
You can set up to 20 sheets of print paper.
Riffle the print paper thoroughly. Insert the print paper into the tray, with the protective sheet at the top.
If there is no protective sheet: Riffle |
|
the print paper thoroughly. Then |
|
insert the print paper with its printing |
|
surface (the side with no imprint) |
|
facing up. | 5 Close the paper tray lid (1) and |
| |
Printing surface | slide it to the paper feeding |
| direction (2). |
| Keep the paper eject tray open. |
| Face stamp marker | |
Paper feeding | toward the paper | |
feeding direction. | ||
direction | ||
|
To set the print paper, face the stamp marker toward the paper feeding direction.
Note
Do not touch the printing surface. Fingerprints on the printing surface may result in imperfect printing.