Sony DPP-FP55 Connecting with a digital camera, 73 GB

Connecting with a digital camera

Symptom	Check	Cause/Solutions
The PictBridge	• Is the digital camera	cConnect the cable correctly.
mark does not	connected correctly?
appear on the	• Is the 1 (on/standby)	cTurn on the 1 (on/standby) switch
LCD screen of
	switch turned on?
the digital
camera.	• Does your digital camera	cRefer to the operating instructions
	support PictBridge?	supplied with the digital camera you
		are using or consult the digital camera
		manufacturer.

•Is “The printer is being connected to a PictBridge camera. ”displayed?

cThe message is not displayed while the printer is in the Edit, Creative Print, or other menu modes. Exit the menu and then connect the cable again.

cDisconnect the digital camera and the printer and then connect them again. Or turn off and then on the printer and the digital camera.

	• Is the USB setting of your	cSet the USB setting of your camera to the
	camera in PictBridge mode?	PictBridge mode.
	• Is printing in process?	cConnect the cable again after printing
		is complete.
You connect and		cThe printer has developed an over-
disconnect the		current error. Unplug the AC power
USB cable, but		cord of the printer, plug it in again,
nothing		and then press the 1 (on/standby)
happens.		switch to recover from the error.
You cannot stop		cThe next print from the one currently
printing even if		printed will be canceled.
you pressed		cDepending on the digital camera you
CANCEL.		use, you cannot cancel printing from the
		printer. Operate the digital camera to
		stop printing. Refer to the operating
		instructions of the digital camera.
You cannot	• Is the message “There	cThe printer cannot print Index print of
make Index	were images for which	the DPOF printing. To make Index
printing.	printing data could not be	printing, insert the memory card
	created.” displayed?	directly (.page 17) or use a mass
		storage external device (.page 18).

Troubleshooting

73 GB