5 Click “Next”.

The license agreement dialog box is displayed.

6 Check “I accept the terms of the license agreement” and click “Next”.

If you check “I do not accept the terms of the license agreement”, you cannot proceed to the next step.

The “Ready to install the program” dialog box is displayed.

7 Click “Install”.

The “Printer connection” dialog box is displayed.

8 Connect the printer to the AC power source (page 16).

9 Press 1 (on/standby) switch to turn on the printer (page 20).

The 1(on/standby) indicator of the printer lights in yellow green.

10 Click “Next”.

11 Connect the USB connectors of the printer and your computer.

To USB connector (B-TYPE)

 

To USB

 

Windows PC

connector

 

Note

 

 

In case you use commercially available

 

USB cable, use a B-type USB cable shorter

 

than 3m in length.

 

 

The printer automatically enters the

Printing

When the printer setup is complete,

PC mode and the printer setup will

 

start automatically.

 

the “InstallShield Wizard Complete”

from

dialog box is displayed.

12 Click “Finish”.

 

PCa

The installation of the printer driver is complete. When you are prompted to restart your computer, restart the computer.

13 • To finish installation, click “Complete” and remove the CD-ROM from your computer and keep it for future use.

• To continue to install the Picture Motion Browser software, click “Installing the Picture Motion Browser” and follow the procedures on page 51.

Continued

49 GB