2Move the frame with g/G/f/F. The frame moves in the selected direction.
3 Press ENTER.
The frame is fixed in the current position.
To change the size of the adjustment frame

Press g/G to select (Enlarge) or (Reduce) and press ENTER. Each time you press ENTER, the frame becomes larger or smaller. You can also enlarge or reduce the size by pressing (zoom in) or (zoom out) buttons on the printer.

Tip

Make the size of the adjustment frame two to seven times as large as the eye size.

4 Press g/G to select and press

ENTER.

The range of red-eye reduction adjustment is enlarged.

5 Press ENTER.

The adjustment takes effect. The Red-eye reduction menu is displayed.
To make a red-eye reduction adjustment for other eyes, repeat steps 3 to 5.
To reset the adjustment

Press CANCEL in step 5 instead of ENTER. The red-eye reduction adjustment is canceled and the window of step 2 is displayed.

Tip

To print the image previewed, press PRINT (page 30).

Printing and saving an image

Printing an image

1 Press PRINT.
The dialog box to specify the print quantity is displayed.
2 Press f/F to increase or decrease the print quantity.

To increase the print quantity one by one, press f repeatedly.

To reduce the print quantity one by one, press F briefly repeatedly.

To reset the print quantity to zero, press F for more than two seconds.
3 Press PRINT to start printing.
The image previewed is printed.

Saving an image

When you select (save) in the Edit or Creative Print menu, the dialog box to select the destination to save the image is displayed. You can save the image under a new image number.

Tip

The selected image will not be overwritten.

1 Select the destination to save an image.
Press f/F to select the media (“Memory Stick”, or “SD Card”) and press ENTER.
30 GB