What is “MagicGate”?

“MagicGate” is the general name of a copyright protection technology developed by Sony. This technology provides authentication and encryption; mutual confirmation is performed between the “Memory Stick” media and the “MagicGate” compliant device that the other can record and play the copyright- protected data correctly. When the authentication is established, the data encryption is performed.

When the data is played, the authentication is also performed. Only when authentication is established, the data is decrypted to the original status and played. Copyright-protected data cannot be played with a device other than authenticated ones.

The printer is not equipped with the “MagicGate” technology and cannot read or write the data subject to the “MagicGate” copyright protection.

Notes on use

Do not insert multiple “Memory Stick” at the same time, which may cause trouble with the printer.

When using a “Memory Stick”, make sure to check correct insertion direction. Wrong usage may cause trouble with the printer.

Do not place the “Memory Stick Duo” or “Memory Stick Micro” within the reach of a small child to prevent him from swallowing it by accident.

Avoid removing the “Memory Stick” from the printer while the printer is reading or writing data.

Data may be damaged in such occasions:

“Memory Stick” is removed or the printer is turned off during a read or write operation.

“Memory Stick” is used in a location subject to static electricity or electrical noises.

We recommend that you save backup of the important data.

The data processed with the computer may not be played with the printer.

When you format a “Memory Stick”, use the format function of the printer or your digital camera. If you format a “Memory Stick” with your computer, images may not be displayed properly.

When you format a “Memory Stick”, all the data including the protected image files will be erased. To avoid erasing important data by accident, make sure to check the content before formatting.

Write-protect switch

Connector

Write Write

enable protect

position position

LOCK LOCK

Place the label here.

You cannot record, edit or delete data if you slide the write-protect switch to LOCK.

When you use a “Memory Stick Duo” without the write-protect switch, be careful not to edit or delete the data by accident.

When you slide the write-protect switch of the “Memory Stick Duo”, use a thin-pointed device.

Do not attach any other material than the supplied label on the labeling position. When you attach the supplied label, be sure to attach it to the labeling position. Be careful that the label does not stick out.

When you write on the memo area of the attached label, do not write forcefully.

When you carry or store the “Memory Stick”, put it in the case supplied with it.

Do not touch the terminal of the “Memory Stick” with your hand or a metal object.

Do not strike, bend or drop the “Memory Stick”.

Do not disassemble or modify the “Memory Stick”.

Do not expose the “Memory Stick” to water.

Continued

information Additional

85 GB