Printing from a PictBridge camera

Printing images from the digital camera

You can connect a PictBridge-compliant digital camera and print an image directly from your digital camera.

Before you begin

You need preparations 1through 4 (pages 10 to 15), and the following:

1

Set your digital camera ready for

 

printing with a PictBridge-

 

compliant printer.

 

The settings and operations that are

 

necessary before connection differ

 

depending on the digital camera. For

 

details, see the operating instructions

 

of the digital camera you use. (In case

 

of Sony Cyber-shot digital camera, for

 

example, select “PictBridge” or

 

“Auto” mode for the “USB Connect”.)

 

 

 

Note

 

 

When you use a DSC-T1, you need to

 

update software version.

2

Connect the printer to the AC

 

power source (page 16).
3 Press 1 (on/standby) switch to

 

turn on the printer (page 20).

 

The 1 (on/standby) indicator of the

 

printer lights in yellow green.

4

Connect a PictBridge-compliant

 

digital camera to the PictBridge

 

connector of the printer (page 18).

 

When you connect a PictBridge-

 

compliant digital camera to the

printer, “The printer is being connected to PictBridge camera.” is displayed on the display window of the printer.

5 Operate the digital camera to print an image.
The printer supports the following prints:
•Single-image print.
•All images print
•Index print
•DPOF print
•Border/Borderless print
•Date print
For notes during printing, see page 21.

Notes

•If you replace a print cartridge while the printer is connected to a PictBridge-compliant digital camera, an image may not be printed properly. If this occurs, disconnect and then connect the digital camera.

•If you print an image from your digital camera without picture quality settings, it will be printed according to the settings of the Set Up menu.

To PictBridge connector (USB A-TYPE)

Camera or other external device

To USB connector

46 GB