Charging the battery pack

1

2

Battery eject lever

3

, Open the battery/“Memory

Stick” cover.

Slide the cover in the direction of the arrow.

•When charging the battery pack, make sure the camera is not turned on (page 15).

•The camera operates only with the “InfoLITHIUM” battery NP-FC10 battery pack (C type) (supplied). You cannot use any other battery pack (page 96).

,Insert the battery pack, and close the cover.

Insert the battery pack with the v mark facing toward the battery compartment as illustrated above. Make sure the battery pack is properly inserted, then close the cover.

•While pushing the battery eject lever down using the front edge of the battery pack, you can easily insert the battery pack.

,Open the jack cover, and connect the AC-LS1A AC power adaptor (supplied) to the DC IN jack of the camera.

Open the cover in the arrow direction as illustrated above. Connect the plug with the

vmark facing up.

•Do not short the DC plug on the AC power adaptor with a piece of metal. This may cause a malfunction.

•Clean the DC plug of the AC power adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack.

10