SETUP 2
Item | Setting | Description |
LCD | BRIGHT/ | Selects the LCD brightness. This has no effect on the recorded images. |
BRIGHTNESS | xNORMAL/ DARK |
|
|
|
|
LCD BACKLIGHT | BRIGHT/ | Selects the brightness of the LCD backlight. Selecting [BRIGHT] makes the screen bright and easy to |
| xNORMAL | see when using the camera outdoors or in other bright locations, but also uses up the battery charge |
|
| faster. Displayed only when you are using your camera with the battery pack. When [POWER SAVE] |
|
| is set to [ON], this item cannot be set. |
|
|
|
BEEP | SHUTTER | – Turns on the shutter sound when you release the shutter. |
| x ON | – Turns on the beep/shutter sound when you press the control button/ release the shutter. |
| OFF | – Turns off the beep/shutter sound. |
|
|
|
VIDEO OUT | NTSC | – Sets the video output signal to NTSC mode (Japan, USA). |
| PAL | – Sets the video output signal to PAL mode (Europe). |
|
|
|
USB CONNECT | PTP/xNORMAL | Switches the USB mode (page 41). |
|
|
|
POWER SAVE | x ON / OFF | Selects whether to use the POWER SAVE mode (page 13). Displayed only when you are using your |
|
| camera with the battery pack. |
|
|
|
94