Others
Symptom | Cause | Solution |
The camera does not | • An “InfoLITHIUM” battery is not used. | p Use an “InfoLITHIUM” battery only (page 96). |
work, no operations can | • The battery level is low or zero (The | p Charge the battery (page 10). |
be performed. | indicator appears.). |
|
| • The AC power adaptor is not connected | p Connect it securely to the DC IN jack of your camera and to a |
| securely. | wall outlet (wall socket) (page 14). |
| • The internal system is not working properly. | p Disconnect, and then, after one minute, reconnect all power |
|
| sources. Then turn the power on and check that the camera |
|
| works properly. |
|
|
|
The power is on, but the | • The internal system is not working properly. | p Remove, and then, after one minute, reinstall the battery. If this |
camera does not work. |
| does not work, press the RESET button located inside the |
|
| battery/“Memory Stick” cover with a pointed object, then turn |
|
| the power on again. (This will clear the date/time settings, etc.) |
|
|
|
You cannot identify the | — | p Check the indicator (pages 99 to 101). |
indicator on the LCD |
|
|
screen. |
|
|
|
|
|
The lens does not move | • The battery pack is discharged. | p Replace it with a fully charged battery or use the AC power |
back when you turn off the |
| adaptor (pages 10, 14). |
camera. |
|
|
|
|
|
The lens gets fogged. | • Condensation is occurring. | p Leave the camera for about an hour and then try to use it again |
|
| (page 95). |
|
|
|
The camera gets hot if you | — | p This is not a malfunction. |
use it for a long time. |
|
|
|
|
|
Troubleshooting
85