![](/images/backgrounds/199763/199763-10451x1.png)
For Macintosh users
Follow the steps below, according to your OS.
OS | Steps |
Mac OS 8.5.1/8.6/9.0 | Steps 1to 5 |
|
|
Mac OS 9.1/9.2/ | Steps 2to 5 |
Mac OS X (v10.0/v10.1) |
|
|
|
(For Mac OS 8.5.1, 8.6, or 9.0 users only)
1Turn on your computer, and set the supplied
The “PIXELA ImageMixer” window appears.
2 (Setup Menu).
3Click (USB Driver).
The “USB Driver” window appears.
4
5Drag and drop the following two files from the window opened in Step 3 into the System Folder icon in the window opened in Step 4.
•Sony USB Driver
•Sony USB Shim
6When the message for confirmation is shown, click [OK].
7Restart your computer.
2Preparing your cameraFor details, see page 43.
3Connecting your camera to your computerFor details, see page 44.
Removing the USB cable from your computer or the “Memory Stick” from your camera during a USB connection
Drag and drop the drive icon of the “Memory Stick” to the “Trash” icon, then remove the USB cable or “Memory Stick.”
*If you are using Mac OS X, remove the USB cable, etc., after you have turned your computer off.
4Copying images1
The contents of the “Memory Stick” inserted in your camera appear.
2
3
4Drag and drop the image files to the hard disk icon.
The image files are copied to your hard disk.
5Viewing the images on your computer1
2
the folder containing the copied files.
Sony” software to copy images to your | Copying |
The image file opens. |
|
• You can use the “PIXELA ImageMixer for |
|
computer and view the images on your | still |
computer. To install the software, insert the | |
supplied | images |
| |
then click the installer icon to select the desired |
|
language under “PIXELA ImageMixer” on the |
|
opening window and follow the instructions on | to |
each window. For details, see the software’s | |
help files. | computeryour |
|
51