Before operation

Set [MOVING IMAGE] to [MULTI BURST] in the SET UP settings (pages 52, 93).

Control button

MENU

Mode dial

Shutter button

aSet the mode dial to .

bPress MENU.

The menu appears.

cSelect (INTERVAL) using b/B, then select the desired

between-frame interval using v/V.

You can choose the between-frame interval from among the following. NTSC: 1/7.5 sec., 1/15 sec., 1/30 sec. PAL: 1/6.3 sec., 1/12.5 sec., 1/25 sec.

(For information on NTSC/PAL, see page 92.)

1/30

1/7.5

1/15

1/30

WB INTERVAL

dPress the shutter button.

16 frames will be recorded as one image (image size: 1280×960).

To delete shot images

When using this mode, you cannot delete only certain frames. When you delete images, all 16 of the frames are deleted at the same time.

1Set the mode dial to .

2Press MENU and select [DELETE], then press the center z.

3Select [OK], then press the center z. All of the frames are deleted.

•When you play back images recorded in Multi Burst mode, the 16 frames will be played back in order, with a fixed interval between them.

•When the images are played back on a computer, the 16 frames you shot will all be displayed at the same time as part of one image.

•When Multi Burst images are played back on a camera without the Multi Burst feature, the 16 frames will all be displayed at the same time, as part of one image, just as they are on a computer.

•For the number of images that can be recorded, see page 88.

•The flash cannot be used.

•The date and time cannot be inserted.

60