PictBridge compliant printer
Symptom | Cause | Solution |
The connection cannot be | • The printer is not compliant with the PictBridge | p Consult with the printer manufacturer. |
established. | standard. |
|
| • The printer is not set for the connection with the | p Check that the printer is turned on and can connect with the |
| camera. | camera. |
| • [USB Connect] is not set to [PictBridge] in the | p Set it to [PictBridge] (page 117). |
| SET UP settings. |
|
| • Depending on the circumstances, the connection | p Disconnect and connect the USB cable again. If an error |
| may not be established. | message is indicated on the printer, refer to the operating |
|
| instructions supplied with the printer. |
|
|
|
You cannot print images. | • The camera is not connected to the printer. | p Check that the camera and the printer are properly connected |
|
| using the USB cable. |
| • The printer is not turned on. | p Turn on the printer. For further information, refer to the |
|
| operating instructions supplied with it. |
| • If you select [Exit] during printing, you may not | p Disconnect and connect the USB cable again. If you cannot |
| print again depending on your printer. | print still, disconnect the USB cable, turn off and on the printer, |
|
| then connect the USB cable again. |
| • Movies cannot be printed. | — |
| • Images modified with a computer or images shot | — |
| using other than this camera may not be able to |
|
| be printed. |
|
|
|
|
Printing is canceled. | • You disconnected the USB cable before the | — |
| (Not disconnect USB cable) mark |
|
| disappears. |
|
|
|
|
You cannot insert the date | • The printer does not provide these functions. | p Consult with the printer manufacturer whether the printer |
or print images in the |
| provides these function or not. |
index mode. | • The date may not be inserted in the index mode | p Consult with the printer manufacturer. |
| depending on the printer. |
|
|
|
|
• The recording date data is not recorded on the | p The images that do not have the recording date data cannot be | |
image. | printed with the date inserted. Set [Date] to [Off] and print it. | |
|
|
|
106