![](/images/backgrounds/199759/199759-13268x1.png)
Protecting images
– Protect
To prevent accidental erasure of an important image, you can protect it.
MENU
Control button
Mode dial
•Note that formatting the “Memory Stick” erases all the data in the “Memory Stick” even if images are protected, and these images cannot be recovered.
•It may take some time to protect the images.
On the single screen
aSet the mode dial to .
bDisplay the image you want to protect with b/B.
cPress MENU.
The menu appears.
dSelect - (Protect) with b/B, then press z.
The image currently being displayed is now protected, and the - (Protect) mark is indicated on the screen.
VGA
101 2/9
Protect
Exit
BACK/NEXT
eTo protect other images, display the image you want to protect with b/B, then press z.
To cancel the protection
In Step 4or 5, press z again. The - mark disappears.
Still image editing
On the Index screen
aSet the mode dial to , press
(index) to switch to the Index screen.
bPress MENU.
The menu appears.
cSelect - (Protect) with b/B, then press z.
dSelect [Select] with b/B, then press z.
eSelect the image you want to protect with v/V/b/B, then press z.
The green - (Protect) mark is indicated on the selected image.
SELECT MENU TONEXT
fTo protect other images, repeat Step 5.
gPress MENU.
68