![](/images/backgrounds/199759/199759-13273x1.png)
When [USB Connect] is not set to [PictBridge] in the SET UP settings
You cannot use the PictBridge function, even when you turn on the camera. Disconnect the USB cable and set [USB Connect] to [PictBridge] (page 72).
Printing images
You can select an image and print it. Set up the camera following the procedure on page 72, and then connect the printer.
MENU
Control button
•You cannot print movies.
•If an error message is sent from the connected
printer during the connection, flashes for about five seconds. In such cases, check the printer.
On the single screen
aDisplay the image you want to print with b/B.
bPress MENU.
The menu appears.
cSelect (Print) with b/B, then press z.
dSelect [This image] with v/V, then press z.
The Print screen appears.
VGA
101 2/9
Index Off
Date Off
Quantity 1
Exit OK
•Setting items not available for a particular printer are not displayed.
eSelect [Quantity] with v/V, select the number of images with b/B.
You can select the number up to 20.
printer) (PictBridge printing image Still
73