Preparing batteries

Use the following batteries in this camera.

Acceptable batteries

HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries (2)

NH-AA-DA (2) (supplied)

NH-AA-2DA twin-pack, etc. (not supplied)

R6 (size AA) alkaline batteries (2)

Batteries that cannot be used

Manganese batteries

Lithium batteries

Ni-cad batteries

If you use the batteries described above, we cannot guarantee full performance of the camera by property of the batteries, such as brownout of the batteries.

Notes on alkaline batteries

Alkaline batteries have a shorter life compared to the supplied Nickel-Metal Hydride batteries. The power may shut off even if the battery remaining indicator shows sufficient battery life remaining.

There is a big difference in the performance of batteries of different types and of batteries made by different manufacturers. This is especially true in low temperatures, where some batteries are noticeably weaker.

You may not be able to shoot in temperatures below 5°C (41°F).

Do not mix new and old batteries.

The battery remaining indicator does not display the correct information.

There is a big difference between available shooting time and available playback time. Due to the characteristics of alkaline batteries, the camera may shut off with the lens portion extended if you change the position of the mode dial. In this case, replace the batteries with new ones or fully charged Nickel-Metal Hydride batteries.

It is recommend that you use the supplied Nickel-Metal Hydride batteries.

Getting started

Charging the batteries

started Getting

1

,Insert Nickel-Metal Hydride batteries into the battery charger (supplied) with the correct polarity +/–.

You cannot charge alkaline batteries using the battery charger.

Be sure to charge the Nickel-Metal Hydride batteries supplied with your camera before using them.

Connect the battery charger to an easily accessible wall outlet (wall socket) close by.

Even if the CHARGE lamp is not lit, the set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

11