Using the AC Adaptor

• The number of images and the battery life that

can be recorded/viewed are decreased under the

following conditions:

– The surrounding temperature is low

– The flash is used

– The camera has been turned on and off many

times

AC Adaptor (not supplied)

2 To a wall outlet (wall socket)

– The zoom is used frequently

– [LCD Backlight] is set to [Bright] in the SET

UP settings

– [AF Mode] is set to [Monitor]

– The battery power is low.

DC plug

1

Jack cover

1

Power cord

2 (mains lead)

16

,Open the jack cover, then connect the AC-LS5 AC Adaptor (not supplied) to the DC IN jack of the camera.

Connect the plug with the v mark facing up.

•Be sure to use the AC-LS5 AC Adaptor. Other AC adaptors cannot be used with this camera.

•Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If some trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

,Connect the power cord (mains lead) to the AC Adaptor and to a wall outlet (wall socket).

•When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera and the wall outlet (wall socket).

•The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off.