Using your camera abroad

Turning your camera on/off

Power sources

You can use your camera in any country or region with the battery charger (supplied) or the AC-LS5 AC Adaptor (not supplied) within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].

BC-CS2A/CS2B

•Do not use an electrical transformer (travel converter), as this may cause a malfunction.

POWER

POWER lamp

,Press POWER to turn on the power.

The POWER lamp lights in green and the power is on. When you turn on the camera for the first time, the Clock Set screen appears (page 18).

To turn off the power

Press POWER again, the POWER lamp goes out, and the camera turns off.

•When you turn the power on with the mode dial

not set to SET UP or , the lens begins to move. Please be careful not to touch the lens.

•Do not leave the camera with the lens portion pulled out by removing the batteries or AC Adaptor (not supplied), etc., for a long time. This may cause a malfunction.

The Auto Power Off function

If no tasks are performed for about three minutes when shooting, viewing images, or setting up the camera while using the batteries, power is automatically shut off to preserve battery power.

However, in the following circumstances, even if the batteries are being used to power the camera, the Auto Power Off function will not work.

•Movies are being played back

•A slide show is being shown

•A cable is connected to the (USB) jack or the A/V OUT (MONO) jack

started Getting

17