Fitting optional microphones (operable with a +48 V supply) other than the
Use the same fitting procedure as for the
Slender microphones (19 mm (3/4 inch) diameter): Use the microphone adaptor supplied with the
First fit the
Note
After removing the camera, if the tripod adaptor pin has not returned to its original position, hold down the red button and move the lever in the direction of the arrow to return the pin to its original position. It is not possible to mount a camera with the pin left out.
Pin
Adjusting the Position of theShoulder PadThe position of the shoulder pad can be adjusted in the following manner:
1 Loosen the two screws.
Screws
Connections and Fitting 2 Chapter
Side the camera forward along the slot, until it clicks firmly into place.
Removal
Tripod
2 Move the shoulder pad forward or backward for your best fit position.
3 Tighten the two screws.
Hold down the red button and pull the lever in the direction of the arrow.
Chapter 2 Fitting and Connections | 33 |