Indication | Meaning |
|
|
MP TAPE | An incorrect type of cassette has |
| been loaded. (The cassette is |
| automatically ejected and the |
| indication disappears in about two |
| seconds.) |
|
|
AUDIO 48kHz? | At back space editing, audio |
(4 flashes/s) | recording mode has changed from |
| 32 kHz mode |
| 48 kHz mode |
|
|
AUDIO 32kHz? | At back space editing, audio |
(4 flashes/s) | recording mode has changed from |
| 48 kHz mode |
| 32 kHz mode |
|
|
Failure in loading or saving the | |
| cassette memory data. |
| When other error indication |
| appears, refer to the operating |
| instructions for the |
|
|
This indicates the VTR’s current operation status (REC, PLAY, etc.).
3Time data indicationTime data from the VTR depending on the DISPLAY switch settings on the VTR are displayed as shown in the following table.
DISPLAY switch | Time data displayed |
setting |
|
|
|
COUNTER | CNT: Tape transport time |
|
|
TC | TCG: a time code data from the time |
| code generator |
| TCR: a time code data from the time |
| code reader |
|
|
UBG: a user bit data from the user | |
| bit generator |
|
|
When using the
One of the following values or messages is displayed to indicate the camera head’s current status or its operation status.
•New values when changing camera head’s settings
•Messages indicating progress or results of adjustments
•The camera head’s current settings (See “Displaying the Status indications” on page 51.)
The camera ID is displayed while the camera is in Color Bar mode.
65600K indicationThis is displayed when the 5600K button is pressed.
7Filter setting indicationThis shows the setting of the FILTER control.
Indication | FILTER control setting | |
|
|
|
CLEAR | 1 | (CLEAR) |
|
|
|
4ND | 2 | (1/4ND) |
16ND | 3 | (1/16ND) |
64ND | 4 | (1/64ND) |
This appears when the skin detail function is activated. (See page 64.)
9White balance indication The following indications appear.Indication | Meaning |
|
|
EZ | Operating in EZ mode (The ATW function is |
| selected.) |
|
|
ATW | The ATW function is selected. (The ATW |
| button was pressed and the indicator is lit.) |
|
|
W:A | White balance memory A is selected. |
|
|
W:B | White balance memory B is selected. |
|
|
W:P | Preset white balance is selected. |
|
|
W:M | Manual adjustment is performed remotely. |
|
|
This shows the gain value.
qa Shutter setting indicationWhen the SHUTTER switch is set to ON, the shutter speed or CLS frequency set on page 1 <SHUTTER> of the PAINT menu is displayed here. You can select the shutter speed or the CLS frequency with the SHUTTER switch.
Menus and Indications Screen Viewfinder 4 Chapter
Chapter 4 Viewfinder Screen Indications and Menus 53