5 Perform the first three steps in “Fitting a VTR”.

6 Screw the connection plate (supplied with the grip for the DVCAM camcorder) which straddles the connection between the camera head and the DSR-1/1P. Also, tighten the two screws in the shoulder pad section. (See page 33.)

Connection plate

Chapter

7 Screw the grip for the

DVCAM camcorder.

Grip for the DVCAM camcorder

Connections and Fitting 2

Attaching a camcorder grip to the PVV-3/3P

The CAC-H102 (optional) is required.

1 Perform steps 2 to 4 in “Fitting a VTR”.

2 Adjust the viewfinder to the full-forward position.

For details, see “Adjusting the viewfinder position” on page 31.

Chapter 2 Fitting and Connections

27