Bring the lens up to the subject so that the image is the required size.
Move the focusing ring to the closest focus position.
Macrophotography

Use the macro function when the subject is at a distance of less than about 90 cm (3 feet) (for the VCL-919BY) from the front of the lens. It is possible to shoot close-ups down to a distance of 10 mm (wide angle, f = 9 mm).

2 3

1

4

ZOOM

SERVO MANU.

1

2

3 Slide the M button toward the rear of the camera, and turn the MACRO ring fully in the direction shown by the arrow.

4 Move the ZOOM selector to the MANU. position, and turn the manual zoom control to focus the image.

To finish close-up shooting

Return the MACRO ring to its original position (turn fully in the opposite direction to the arrow in the figure).

To reduce the size of the image

After completing steps 1 to 4 above, if you wish to reduce the size of the image, turn the MACRO ring back slightly, then use the manual zoom control again to focus the image.

Settings and Adjustments 5 Chapter

Chapter 5 Adjustments and Settings

85