Fitting a VTR

This section explains how to attach the DSR-1/1P to

When replacing the camera head grip with a camcorder

the camera head. The method for attaching a PVV-3/

grip, see “Using the Camcorder Grip” (page 26).

3P is similar.

 

1 Set the PRO 76-pin DIGITAL connector on the DSR-1/1P. (The camera connector on the PVV-3/3P is PRO 50-pin.)

For details, see the operating instructions for the DSR-1/1P.

VTR (DSR-1/1P)

Camera connector (PRO 76-pin DIGITAL)

2 Loosen the two screws and

Screws

slide the shoulder pad as far as

 

it will go toward the front.

 

3 Align the projection on the bottom of the DSR-1/1P with the slot on the camera head.

SlotProjection

Camera head

Groove

4 Slide the DSR-1/1P and the camera head together in the groove as far as possible.

Tighten the two screws in the grip connector and the two screws in the shoulder pad section.

Connections and Fitting 2 Chapter

Chapter 2 Fitting and Connections

25