Location and Function of Parts

Left and upper view

Overview 1 Chapter

1Fitting for optional microphone holder

2 Accessory fitting shoe and screw hole

3Shoulder strap fixture

4 Viewfinder front-to-back position locking lever

5 Viewfinder fitting shoe

6 Viewfinder left-to-right position fixing ring

7 Viewfinder front-to-back position locking knob

8MONITOR OUT connector

9VIDEO OUT connector

0 LENS connector

qa REMOTE connector

qs VTR and camera adaptor connectors

1Fitting for optional microphone holder

You can fit an optional CAC-12 Microphone Holder here. (See page 32.)

2Accessory fitting shoe and screw hole

Attach optional video lights or other accessories here.

3Shoulder strap fixture

To use the shoulder strap supplied with the VTR, fix one end here and the other end to the VTR.

4Viewfinder front-to-back position locking lever Release this lever to adjust the front-to-back position of the viewfinder. (See page 31.)

5Viewfinder fitting shoe

Fix the DXF-801/801CE Viewfinder here.

6Viewfinder left-to-right position fixing ring Loosen this ring to adjust the left-to-right position of the viewfinder. (See page 31.)

7Viewfinder front-to-back position locking knob Loosen this knob to adjust the front-to-back position of the viewfinder. (See page 31.)

8MONITOR OUT connector (BNC) Outputs both the camera video and the character information as displayed on the viewfinder screen.

You can connect an optional LCD color monitor to this connector.

9VIDEO OUT connector (BNC)

This outputs the video signal captured by the camera.

16 Chapter 1 Overview