Connections and Fitting 2 Chapter
Fitting a VTRUsing the Camcorder Grip
Attaching a camcorder grip to the
When using the camera head with a VTR as a | camcorder grip and the method for attaching it differ |
camcorder, you can replace the camera head’s grip | slightly depending on the type of VTR. |
with a camcorder grip (not supplied). The type of |
|
Attaching a camcorder grip to the DSR-1/1P
The
1 Adjust the viewfinder to the
For details, see “Adjusting the viewfinder position” on page 31.
2 Remove the camera head grip’s three screws, then pull up the grip to remove it.
3 Remove the VTR connection plate.
VTR connection plate
4 Remove the
Camera head connection plate
Shoulder strap fitting
26 | Chapter 2 Fitting and Connections |