Sony FS-2570, FS-1570 manual Registering stations, Station entry screen

9 NBDP PREPARATIONS

to the station name to denote multiple frequency pairs. For example, station name FURUNO followed by -1, -2, -3, etc. for each frequency pair required.

9.2.1 Registering stations

1. Press the function key [F5] followed by the [1] key to show the Station Entry screen.

Station Entry

Station List

Station Set Up

Create

Change

Station	: _
ID Code	:
Mode	: ARQ FEC

CH/Table : Channel ScanTable

Num/Table:

Station entry screen

2. On the right-hand side of the screen, Create and Change are shown and Create should be underlined. If it is not, underline it by pressing [→ ], [↑ ] and the [Enter] key.

3.The cursor is now choosing Station. Enter station name, using up to 18 characters.

4.Press the [↓ ] key to choose ID Code. Enter station ID code.

5.Press the [↓ ] key to choose Mode. Choose communication mode with [←] or [→ ] among the following:

ARQ: Automatic Retransmission Request

FEC: Forward Error Correction

6.Press the [↓ ] key to choose CH/Table. Choose ScanTable or Channel as appropriate.

7.Press the [↓ ] key to choose Num/Table.

9-3

offered by Busse-Yachtshop.de email: info@busse-yachtshop.de