Manuals / Sony / Cell Phone / Cell Phone

Sony FS-1570, FS-2570 manual Category distress transmit sure?, Distress relay sel call in progress

Models: FS-2570 FS-1570

1 222

Download 222 pages 57.34 Kb

Page 60

4 DISTRESS OPERATIONS

Category distress transmit sure?

COAST ID: 001234567

ID IN DIST: 123456789


DSC FREQ :	8414.5 KHZ
KEEP PRESSED FOR		3S

Compose message

				CALL TYPE	: INDIVIDUAL
				DISTRESS RELAY
	[CALL] key			COAST ID: 001234567
	[CALL] key			ID IN DIST: 123456789
	pressed 3			ID IN DIST: 123456789
	pressed 3			DSC FREQ :	8414.5 KHZ
	seconds.			DSC FREQ :	8414.5 KHZ
	seconds.			TIME TO GO :	GO TO EASY VIEW
				TIME TO GO :	2M10S
					Timer counts
					Timer counts
					down time
					remaining
					remaining
					(See note below.)

Distress relay sel call in progress!

TO COAST: 001234567

SHIP IN DIST: 123456789

DSC FREQ :	8414.5 KHZ
TIME TO GO :	5S

Note: If a coast station acknowledges the call before the timer counts down to zero, press the [CANCEL] key to cancel the distress relay call.

10.After the call is transmitted, the message “Wait for distress relay acknowledge.” appears. After you have received the distress acknowledgement from the coast station, communicate with the coast station by telephone, over the DSC frequency specified. If you do not receive the distress acknowledgement from a coast station after the timer counts down to zero, transmit the distress relay again, over a different frequency.

4-12

offered by Busse-Yachtshop.de

email: info@busse-yachtshop.de

Image 60

Sony FS-1570, FS-2570 manual Category distress transmit sure?, Distress relay sel call in progress

Contents

SSB Radiotelephone 00080933800 Distress Alert Calling Procedure Safety Instructions Iii Table of Contents DSC Overview Sending Distress AlertDSC/WATCH Receiver Setup Vii Nbdp PreparationsViii Features ForewordGeneral Program Number DSC/watch receiverNbdp with optional Nbdp Terminal Unit IB-581/IB-583 PC Board Program No On Display RemarksSystem Configuration FS-2570 250 WFS-1570 150 W XiiSpecifications of SSB Radiotelephone FS-1570/2570DSC/WATCH Keeping Receiver Digital Selective Calling IB-583 IB-581Interface Power switch Turns the power on/off Operational OverviewControlsFURUNO Description of controlsTurning the Power On/Off Panel Dimmer, LCD ContrastIndications DSC standby screenRadiotelephone screen DSC standby screenLoudspeaker Scanning Routine DSC FrequenciesAutomatic Acknowledge On/Off Manual Entry of Position and Time After last digit System Characteristics Automatic setting of working frequencyEquipment priority Controls become inoperativePower Supply Unit option AC and DC power switchesPower supply units SSB Radiotelephone TransmittingChoosing class of emission Choosing channel, frequency Choosing channelChoosing band and band channel with the Enter knob Rotate the Enter knob to set band or channel desiredTuning Choosing frequencyEnter frequency by one of the methods below Entering frequency with the numeric keysUsing the handset Monitoring transceiver output powerReducing transmitter power Displaying IA, IC, VC or RFRF gain sensitivity adjustment ReceivingMeter Monitoring traffic on intended transmit frequencySquelch control, squelch frequency Noise blankerSquelch on/off Squelch frequencyIntercom Telex CommunicationsWhen Automatic Tuning Fails Replace the cover Turn on the control unitUser Channels Registering user channelsWindow shown below appears Entry is selected push the Enter knobChannels may be registered FAX Enable/Disable Press the Cancel key to close the menuDeleting user channels Deleting individual user channelsSpeaker Setting in Off Hook This page intentionally left blank What is DSC? Call over Public Switched Telephone Network PstnDSC Overview DSC CallContents of a DSC call Distress alert call and reply Case of Accidental Trans Mission of the Distress AlertAudio Alarms Basic procedure radiotelephoneAlarm Frequency interval Individual callInterpreting Call Displays Receive callsDistress receive call Individual receive call Received messageSend calls Distress send callIndividual send call This page intentionally left blank Distress Operations Sending Distress AlertRussian version Distress Operations Rotate Enter knob to scroll Push the Enter knob to open the Input Type menu Push the Enter knob to open the time input windowCompose Receiving a Distress Alert Communicating by Nbdp Terminal UnitDistress alert received on MF band Action for ship receiving distress alert on MF bandCompose message Distress alert received on HF band Distress acknowledge call in progressAction for ships receiving distress alert on HF band Sending the distress relay to coast station on HF bandPush the Enter knob to open the DSC FREQ. menu Compose messageCategory distress transmit sure? Distress relay sel call in progressSending Distress Relay on Behalf of a Ship in Distress Sending distress relay to coast stationPush the Enter knob to open the Nature menu Compose message ID in Dist No Info Nature Sinking Sending distress relay to all ships Communicate with the coast stationPush the Enter knob to open the Nature menu Ship in distress and time, manually or automaticallyDistress relay all call in progress Receiving Distress Relay All Ships Receiving Distress Relay from Coast StationThis page intentionally left blank CALLING, Receiving All Ships CallSending an all ships call CALLING, Receiving Receiving an all ships call Sending message by Nbdp Terminal UnitIndividual Call Sending an individual callNBDP-ARQ How to Set Working Frequency, Channel Routine or ships business priorityHow to Set DSC Frequency Press Call key for forced transmission Able acknowledge call received Unable acknowledge call receivedNo response! Try calling again? Setting ACQ /SQ key Can send acknowledge Can send Unable AutomaticallySending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Call Type Able Acknowledgement Manually acknowledging individual call with Unable Group Call Sending a group callDisplay changes as below Compose message MHZ Priority Routine COM. Type Telephone COM. Freq Receiving a group call Receiving message by Nbdp Terminal UnitGeographical Area Call Sending a geographical area call↓ 10 → Area 34 N 140 W ↓ 10 → Receiving a geographical area call Neutral Craft Call Sending a neutral craft callSending message by Nbdp Terminal Unit Receiving a neutral craft call Medical Transport Call Sending a medical transport callReceiving a medical transport call Polling Call Sending a polling callCall Type Station ID Polling acknowledge call received Receiving a polling call Automatic replyManual reply After the call is sent the DSC standby screen appearsPosition Call Finding position of other stationSending own ships position to other station Position call requesting other ship’s position Pos acknowledge call received Position call other ship requests your position Acknowledge call receivedAutomatic reply Manual reply Pstn Call Sending a Pstn call, receiving acknowledge back ACK BQPush the Enter knob to open the TEL NO. menu Compose message Waiting for acknowledgement Then, one of the following displays appearsUnable acknowledge call received Receiving a Pstn call, sending acknowledge back ACK BQ Shortly thereafter, one of the following messages appears Charge Information Charge Time 00H 12M 34S To view the contents of a file, do the following Log FileOpening a log file Erasing Message Files Preparing TX Calls Preparing Individual CallsEnter file name and number as shown on the next NBDP-FEC COM. Freq No Info DSC FreqHow to Enter File Name and Number Preparing Group Calls Preparing Geographical Area Calls Call Type GROUP6CALL Preparing Pstn Calls Preparing Test Calls Sending Prepared Calls Sending without modificationEditing before sending Deleting Send Message Files Printing List of Send Message FilesDSC/WATCH Receiver Setup Setting AlarmsAuto Ack Menu Can send acknowledge Can send Unable manually ManuallyPrinting Messages Sample printoutsSetting Scan Frequencies Distress frequenciesRoutine frequencies International channels Distress channelsLocal channels Adjusting Volume Volume setupNbdp System Overview Turning on the Nbdp SystemNbdp terminal unit, printer and keyboard Features of the IB-583 Description of EquipmentTerminal unit Communication status displayKeyboard KeyboardFunction Keys, Menu Operation Menu conventionsInverse video UnderlineMenu overview Selecting menusFile menu Selecting menu items and optionsFunction key description Edit menu UndoCut CopyCancel Sending Timer OperationFunction key F3 Operate menu Call StationSetting with ← or → key Function key F4 Window menuWindow menu Displays desired calendar month and year. To changeFunction key F5 Station menu Group ID EntrySelect ID Entry Setup Slave DelayFunction key F6 System menu TX/RX MSG SaveCursor is choosing Window Color Setup press the Enter key Nbdp Preparations Registering Answerback Code & ID CodesRegistering answerback code Answerback code entry screenStation List Registering ID codesMessage for confirmation of code entered ID code screenRegistering stations Station entry screenOK/Cancel prompt Editing/Deleting stationsScanning group list Timer Programming Registering timer programsTimer operation entry screen Editing/Deleting timer programs User channel entry screenScan Channel Groups Editing/Deleting user channelsRegistering scan channel groups To quit, press the Esc keyEditing/Deleting scan channel groups Editing channelsAdding channels Deleting channelsNbdp File Operations Opening and Closing FilesCreating Files 10-110-2 Type your messageSaving a File Formatting floppy disks10-3 Saving a file 10-4Close text screen Editing Files Cutting and pasting text10-5 Cutting textCopying and pasting text Select allSearching text 10-6Replacing text Goto line10-7 Replace screenSwitching between files Opening FilesGoto top, Goto bottom Opening a fileRenaming Files Saving a File Under a New NameDeleting Files Real Time PrintingPrinting Files 10-10Nbdp TRANSMITTING, Receiving Manual Calling11-1 Press the 9 key to choose Set Frequency11-2 Manual calling screenARQ Mode Operation 11-3Establishing connection Press the 1 key to choose Call Station11-4 Transmit message by one of the following methodsSending a file stored on a floppy disk Send file screenFEC Mode Operation Choosing Receive Mode11-5 Stopping transmissionCommunication Example 11-6Communications example 11-7 Table of abbreviationsTimer Operation Enabling timer operationCommand and abbreviation Timer operation listStopping timer operation Scanning11-9 Communication Buffer Preparing Macrofiles for Automatic TelexAutomatic telex overview 11-10Preparations 11-11Registering answerback code Registering scan groupsCommands Command Parameter ContentCommands processed by Danish coast station Lyngby Command FunctionActual procedure for store-and-forward telex Store-and-forward method11-13 11-14 Sample macrofile for store-and-forward methodClose text prompt Dirtlx macrofile 11-15Press the Enter key and enter a file name as follows Sample Dirtlx macrofileProcedure for Dirtlx 11-16Automatic Telex using Macrofile Basic procedureActual procedure 11-1711-18 Call macro screenPress the ↓ key to choose a macrofile Press the Enter key Maintenance & Troubleshooting Daily Test12-1 Radiotelephone Test Antenna Coupler Test12-2 Maintenance Maintenance check points12-3 Check Point Remedy/RemarksReplacement of Fuses 12-4Unit Fuse Simple Troubleshooting Error MessagesProblem Probable cause Remedy Error message Meaning Remedy12-6 WR1, WR2 PLL unlock Check if the reference oscillator isTest Call 12-712-8 Nbdp Terminal Unit Maintenance Cleaning the equipmentConnectors and earth connection Floppy disk driveDiagnostics General diagnostics12-10 Press the function key F6 to display the System menu12-11 Tone testTone test menu Tone test12-12 Appendix Menu TreeDSC/watch receiver AP-1Radiotelephone AP-2Nbdp terminal unit telex AP-3Frequency Tables DSC frequency tableAP-4 TX kHz RX kHz Remarks File NameCustom channels to be programmed by Furuno dealers AP-5MF band working carrier frequencies ref. US CFR 47 Part AP-6MF band SSB working carrier frequencies AP-7MHz ITU SSB carrier frequencies ITU RR Appendix AP-8AP-9 12/16 ITU SSB carrier frequencies ITU RR Appendix AP-1018/19, 22, 25/26 ITU SSB carrier frequencies ITU RR Appendix AP-11MF band telex frequency table AP-12AP-13 ITU Telex frequency /4AP-14 Frequency /4AP-15 AP-16 ITU Telex Frequency /4Telex Abbreviations AP-17Digital Interface IEC O SentencesAP-18 Input sentences IECAP-19 GLL Geographic position latitude/longitudeZDA Time and date AP-20 RMA Recommended minimum specific LORAN-C dataAP-21 RMC Recommended minimum specific GPS/TRANSIT dataSchematic diagram AP-22Parts List AP-23Control unit FS-1570/2570 Model FS-1570/2570 UnitAP-24 Transceiver unit FS-1570TModel FS-1570T Unit AP-25 Transceiver unit FS-2570TModel FS-2570T Unit Parts Location Transceiver unit FS-2570TAP-26 Transceiver unit FS-1570T AP-27Control unit FS-2570C AP-28Index IN-1IN-2 IndexOffered by Busse-Yachtshop.de Email info@busse-yachtshop.de Offered by Busse-Yachtshop.de Email info@busse-yachtshop.de