Manuals / Sony / Cell Phone / Cell Phone

Sony FS-1570, FS-2570 manual Manual reply, After the call is sent the DSC standby screen appears

Models: FS-2570 FS-1570

1 222

Download 222 pages 57.34 Kb

Page 100

5 CALLING, RECEIVING

Manual reply

1.The display changes as shown in the illustration below and the audio alarm sounds when a polling request call is received and the status of the [5/ ACK/SQ] key is MANUAL ACK.

Polling request call received.

FROM SHIP : 987654321

ROUTINE

STOP ALARM

2. Press the [CANCEL] key to silence the alarm. The display changes as below.

Received message

MAR-23-2002-23:01

POLLING REQUEST

FROM SHIP : 987654321

ROUTINE

ANSWER 34ALL VIEW

3.To respond to the call, rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob. The display changes as below.

Compose message

CALL TYPE	: POLLING
ACKNOWLEDGEMENT
STATION ID: 987654321
PRIORITY	: ROUTINE

DSC FREQ	: 2M-INTL

GO TO ALL VIEW

4.Press the [CALL] key to send the polling acknowledge call. The display changes as below.

Polling acknowledge call in progress!

TO SHIP :	987654321
ROUTINE

DSC FREQ :	2177.0 KHZ
TIME TO GO:	7S

After the call is sent the DSC standby screen appears.

5-32

offered by Busse-Yachtshop.de

email: info@busse-yachtshop.de

Image 100

Sony FS-1570, FS-2570 manual Manual reply, After the call is sent the DSC standby screen appears

Contents

SSB Radiotelephone 00080933800 Distress Alert Calling Procedure Safety Instructions Iii Table of Contents DSC Overview Sending Distress AlertDSC/WATCH Receiver Setup Vii Nbdp PreparationsViii Foreword FeaturesGeneral Program Number DSC/watch receiverNbdp with optional Nbdp Terminal Unit IB-581/IB-583 PC Board Program No On Display RemarksSystem Configuration FS-2570 250 WFS-1570 150 W XiiSpecifications of SSB Radiotelephone FS-1570/2570DSC/WATCH Keeping Receiver Digital Selective Calling IB-583 IB-581Interface Power switch Turns the power on/off Operational OverviewControlsFURUNO Description of controlsTurning the Power On/Off Panel Dimmer, LCD ContrastIndications DSC standby screenRadiotelephone screen DSC standby screenScanning Routine DSC Frequencies LoudspeakerAutomatic Acknowledge On/Off Manual Entry of Position and Time After last digit System Characteristics Automatic setting of working frequencyEquipment priority Controls become inoperativeAC and DC power switches Power Supply Unit optionPower supply units Transmitting SSB RadiotelephoneChoosing class of emission Choosing channel, frequency Choosing channelChoosing band and band channel with the Enter knob Rotate the Enter knob to set band or channel desiredTuning Choosing frequencyEnter frequency by one of the methods below Entering frequency with the numeric keysUsing the handset Monitoring transceiver output powerReducing transmitter power Displaying IA, IC, VC or RFRF gain sensitivity adjustment ReceivingMeter Monitoring traffic on intended transmit frequencySquelch control, squelch frequency Noise blankerSquelch on/off Squelch frequencyIntercom Telex CommunicationsWhen Automatic Tuning Fails Replace the cover Turn on the control unitUser Channels Registering user channelsWindow shown below appears Entry is selected push the Enter knobChannels may be registered FAX Enable/Disable Press the Cancel key to close the menuDeleting user channels Deleting individual user channelsSpeaker Setting in Off Hook This page intentionally left blank What is DSC? Call over Public Switched Telephone Network PstnDSC Overview DSC CallContents of a DSC call Distress alert call and reply Case of Accidental Trans Mission of the Distress AlertAudio Alarms Basic procedure radiotelephoneAlarm Frequency interval Individual callReceive calls Interpreting Call DisplaysDistress receive call Individual receive call Received messageDistress send call Send callsIndividual send call This page intentionally left blank Sending Distress Alert Distress OperationsRussian version Distress Operations Rotate Enter knob to scroll Push the Enter knob to open the Input Type menu Push the Enter knob to open the time input windowCompose Receiving a Distress Alert Communicating by Nbdp Terminal UnitDistress alert received on MF band Action for ship receiving distress alert on MF bandCompose message Distress alert received on HF band Distress acknowledge call in progressAction for ships receiving distress alert on HF band Sending the distress relay to coast station on HF bandPush the Enter knob to open the DSC FREQ. menu Compose messageCategory distress transmit sure? Distress relay sel call in progressSending Distress Relay on Behalf of a Ship in Distress Sending distress relay to coast stationPush the Enter knob to open the Nature menu Compose message ID in Dist No Info Nature Sinking Sending distress relay to all ships Communicate with the coast stationPush the Enter knob to open the Nature menu Ship in distress and time, manually or automaticallyDistress relay all call in progress Receiving Distress Relay All Ships Receiving Distress Relay from Coast StationThis page intentionally left blank All Ships Call CALLING, ReceivingSending an all ships call CALLING, Receiving Receiving an all ships call Sending message by Nbdp Terminal UnitIndividual Call Sending an individual callNBDP-ARQ How to Set Working Frequency, Channel Routine or ships business priorityHow to Set DSC Frequency Press Call key for forced transmission Unable acknowledge call received Able acknowledge call receivedNo response! Try calling again? Setting ACQ /SQ key Can send acknowledge Can send Unable AutomaticallySending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Call Type Able Acknowledgement Manually acknowledging individual call with Unable Sending a group call Group CallDisplay changes as below Compose message MHZ Priority Routine COM. Type Telephone COM. Freq Receiving a group call Receiving message by Nbdp Terminal UnitGeographical Area Call Sending a geographical area call↓ 10 → Area 34 N 140 W ↓ 10 → Receiving a geographical area call Neutral Craft Call Sending a neutral craft callSending message by Nbdp Terminal Unit Receiving a neutral craft call Medical Transport Call Sending a medical transport callReceiving a medical transport call Polling Call Sending a polling callCall Type Station ID Polling acknowledge call received Receiving a polling call Automatic replyManual reply After the call is sent the DSC standby screen appearsFinding position of other station Position CallSending own ships position to other station Position call requesting other ship’s position Pos acknowledge call received Acknowledge call received Position call other ship requests your positionAutomatic reply Manual reply Pstn Call Sending a Pstn call, receiving acknowledge back ACK BQPush the Enter knob to open the TEL NO. menu Compose message Waiting for acknowledgement Then, one of the following displays appearsUnable acknowledge call received Receiving a Pstn call, sending acknowledge back ACK BQ Shortly thereafter, one of the following messages appears Charge Information Charge Time 00H 12M 34S Log File To view the contents of a file, do the followingOpening a log file Erasing Message Files Preparing TX Calls Preparing Individual CallsEnter file name and number as shown on the next NBDP-FEC COM. Freq No Info DSC FreqHow to Enter File Name and Number Preparing Group Calls Preparing Geographical Area Calls Call Type GROUP6CALL Preparing Pstn Calls Preparing Test Calls Sending without modification Sending Prepared CallsEditing before sending Deleting Send Message Files Printing List of Send Message FilesDSC/WATCH Receiver Setup Setting AlarmsAuto Ack Menu Can send acknowledge Can send Unable manually ManuallyPrinting Messages Sample printoutsDistress frequencies Setting Scan FrequenciesRoutine frequencies Distress channels International channelsLocal channels Adjusting Volume Volume setupTurning on the Nbdp System Nbdp System OverviewNbdp terminal unit, printer and keyboard Features of the IB-583 Description of EquipmentTerminal unit Communication status displayKeyboard KeyboardFunction Keys, Menu Operation Menu conventionsInverse video UnderlineMenu overview Selecting menusFile menu Selecting menu items and optionsFunction key description Edit menu UndoCut CopyCancel Sending Timer OperationFunction key F3 Operate menu Call StationSetting with ← or → key Function key F4 Window menuWindow menu Displays desired calendar month and year. To changeGroup ID Entry Function key F5 Station menuSelect ID Entry Setup Slave DelayFunction key F6 System menu TX/RX MSG SaveCursor is choosing Window Color Setup press the Enter key Nbdp Preparations Registering Answerback Code & ID CodesRegistering answerback code Answerback code entry screenStation List Registering ID codesMessage for confirmation of code entered ID code screenRegistering stations Station entry screenEditing/Deleting stations OK/Cancel promptScanning group list Registering timer programs Timer ProgrammingTimer operation entry screen Editing/Deleting timer programs User channel entry screenScan Channel Groups Editing/Deleting user channelsRegistering scan channel groups To quit, press the Esc keyEditing/Deleting scan channel groups Editing channelsAdding channels Deleting channelsNbdp File Operations Opening and Closing FilesCreating Files 10-110-2 Type your messageFormatting floppy disks Saving a File10-3 10-4 Saving a fileClose text screen Editing Files Cutting and pasting text10-5 Cutting textCopying and pasting text Select allSearching text 10-6Replacing text Goto line10-7 Replace screenSwitching between files Opening FilesGoto top, Goto bottom Opening a fileRenaming Files Saving a File Under a New NameDeleting Files Real Time PrintingPrinting Files 10-10Nbdp TRANSMITTING, Receiving Manual Calling11-1 Press the 9 key to choose Set Frequency11-2 Manual calling screenARQ Mode Operation 11-3Establishing connection Press the 1 key to choose Call Station11-4 Transmit message by one of the following methodsSending a file stored on a floppy disk Send file screenFEC Mode Operation Choosing Receive Mode11-5 Stopping transmission11-6 Communication ExampleCommunications example 11-7 Table of abbreviationsTimer Operation Enabling timer operationCommand and abbreviation Timer operation listScanning Stopping timer operation11-9 Communication Buffer Preparing Macrofiles for Automatic TelexAutomatic telex overview 11-10Preparations 11-11Registering answerback code Registering scan groupsCommands Command Parameter ContentCommands processed by Danish coast station Lyngby Command FunctionStore-and-forward method Actual procedure for store-and-forward telex11-13 Sample macrofile for store-and-forward method 11-14Close text prompt Dirtlx macrofile 11-15Press the Enter key and enter a file name as follows Sample Dirtlx macrofileProcedure for Dirtlx 11-16Automatic Telex using Macrofile Basic procedureActual procedure 11-17Call macro screen 11-18Press the ↓ key to choose a macrofile Press the Enter key Daily Test Maintenance & Troubleshooting12-1 Antenna Coupler Test Radiotelephone Test12-2 Maintenance Maintenance check points12-3 Check Point Remedy/Remarks12-4 Replacement of FusesUnit Fuse Simple Troubleshooting Error MessagesProblem Probable cause Remedy Error message Meaning Remedy12-6 WR1, WR2 PLL unlock Check if the reference oscillator isTest Call 12-712-8 Nbdp Terminal Unit Maintenance Cleaning the equipmentConnectors and earth connection Floppy disk driveDiagnostics General diagnostics12-10 Press the function key F6 to display the System menu12-11 Tone testTone test menu Tone test12-12 Appendix Menu TreeDSC/watch receiver AP-1Radiotelephone AP-2Nbdp terminal unit telex AP-3Frequency Tables DSC frequency tableAP-4 TX kHz RX kHz Remarks File NameCustom channels to be programmed by Furuno dealers AP-5MF band working carrier frequencies ref. US CFR 47 Part AP-6MF band SSB working carrier frequencies AP-7MHz ITU SSB carrier frequencies ITU RR Appendix AP-8AP-9 12/16 ITU SSB carrier frequencies ITU RR Appendix AP-1018/19, 22, 25/26 ITU SSB carrier frequencies ITU RR Appendix AP-11MF band telex frequency table AP-12AP-13 ITU Telex frequency /4AP-14 Frequency /4AP-15 AP-16 ITU Telex Frequency /4Telex Abbreviations AP-17Digital Interface IEC O SentencesAP-18 Input sentences IECGLL Geographic position latitude/longitude AP-19ZDA Time and date AP-20 RMA Recommended minimum specific LORAN-C dataAP-21 RMC Recommended minimum specific GPS/TRANSIT dataSchematic diagram AP-22Parts List AP-23Control unit FS-1570/2570 Model FS-1570/2570 UnitTransceiver unit FS-1570T AP-24Model FS-1570T Unit Transceiver unit FS-2570T AP-25Model FS-2570T Unit Transceiver unit FS-2570T Parts LocationAP-26 Transceiver unit FS-1570T AP-27Control unit FS-2570C AP-28Index IN-1IN-2 IndexOffered by Busse-Yachtshop.de Email info@busse-yachtshop.de Offered by Busse-Yachtshop.de Email info@busse-yachtshop.de