Manuals / Sony / Cell Phone / Cell Phone

Sony FS-1570, FS-2570 manual Manually acknowledging individual call with Able

Models: FS-2570 FS-1570

1 222

Download 222 pages 57.34 Kb

Page 80

5 CALLING, RECEIVING

5.If you want to send a proposal, rotate the [ENTER] knob to choose RE-SEND and then push the [ENTER] knob.

Compose message

CALL TYPE : UNABLE

ACKNOWLEDGEMENT

REASON: NO REASON

GIVEN

STATION ID: 001234567

DSC FREQ : 12M-INTL

GO TO ALL VIEW

a)Push the [ENTER] knob to open the CALL TYPE menu.

b)Rotate the [ENTER] knob to choose ABLE and then push the [ENTER] knob.

c)Prepare message as appropriate and then press the [CALL] key to transmit the message. After you receive acknowledgement from the other party you can start communications.

Manually acknowledging individual call with “ABLE”

1.When an individual call is received and the equipment is set up with manual acknowledge (MANUAL ACK)and comply type “ABLE,” the alarm sounds and the display looks like the one below.

Individual request call received.

FROM SHIP:	121234567
ROUTINE
TELEPHONE	CH 401

STOP ALARM

2. Press the [CANCEL] key to silence the alarm. The display changes as shown below.

Received message

MAR-23-2002-23:00:00

ECC: OK

INDIVIDUAL REQUEST

FROM SHIP:	001234567
ROUTINE
TELEPHONE	CH 401

ANSWER 34ALL VIEW

To view contents, rotate [ENTER] knob to choose ALL VIEW and then push [ENTER] knob.

3.Rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob. Push the [ENTER] knob again to open the CALL TYPE menu.

Compose message

CALL TYPE : ABLE

ACKNOWLEDGEMENT

STATION ID		ABLE
COM. TYPE		UNABLE
COM. FREQ		: CH 401
DSC FREQ		: 4M-INTL

GO TO ALL VIEW

5-12

offered by Busse-Yachtshop.de

email: info@busse-yachtshop.de

Image 80

Sony FS-1570, FS-2570 manual Manually acknowledging individual call with Able

Contents

SSB Radiotelephone 00080933800 Distress Alert Calling Procedure Safety Instructions Iii Table of Contents DSC Overview Sending Distress AlertDSC/WATCH Receiver Setup Vii Nbdp PreparationsViii General FeaturesForeword Program Number DSC/watch receiverNbdp with optional Nbdp Terminal Unit IB-581/IB-583 PC Board Program No On Display RemarksSystem Configuration FS-2570 250 WFS-1570 150 W XiiSpecifications of SSB Radiotelephone FS-1570/2570DSC/WATCH Keeping Receiver Digital Selective Calling IB-583 IB-581Interface Power switch Turns the power on/off Operational OverviewControlsFURUNO Description of controlsTurning the Power On/Off Panel Dimmer, LCD ContrastIndications DSC standby screenRadiotelephone screen DSC standby screenAutomatic Acknowledge On/Off LoudspeakerScanning Routine DSC Frequencies Manual Entry of Position and Time After last digit System Characteristics Automatic setting of working frequencyEquipment priority Controls become inoperativePower supply units Power Supply Unit optionAC and DC power switches Choosing class of emission SSB RadiotelephoneTransmitting Choosing channel, frequency Choosing channelChoosing band and band channel with the Enter knob Rotate the Enter knob to set band or channel desiredTuning Choosing frequencyEnter frequency by one of the methods below Entering frequency with the numeric keysUsing the handset Monitoring transceiver output powerReducing transmitter power Displaying IA, IC, VC or RFRF gain sensitivity adjustment ReceivingMeter Monitoring traffic on intended transmit frequencySquelch control, squelch frequency Noise blankerSquelch on/off Squelch frequencyIntercom Telex CommunicationsWhen Automatic Tuning Fails Replace the cover Turn on the control unitUser Channels Registering user channelsWindow shown below appears Entry is selected push the Enter knobChannels may be registered FAX Enable/Disable Press the Cancel key to close the menuDeleting user channels Deleting individual user channelsSpeaker Setting in Off Hook This page intentionally left blank What is DSC? Call over Public Switched Telephone Network PstnDSC Overview DSC CallContents of a DSC call Distress alert call and reply Case of Accidental Trans Mission of the Distress AlertAudio Alarms Basic procedure radiotelephoneAlarm Frequency interval Individual callDistress receive call Interpreting Call DisplaysReceive calls Individual receive call Received messageIndividual send call Send callsDistress send call This page intentionally left blank Russian version Distress OperationsSending Distress Alert Distress Operations Rotate Enter knob to scroll Push the Enter knob to open the Input Type menu Push the Enter knob to open the time input windowCompose Receiving a Distress Alert Communicating by Nbdp Terminal UnitDistress alert received on MF band Action for ship receiving distress alert on MF bandCompose message Distress alert received on HF band Distress acknowledge call in progressAction for ships receiving distress alert on HF band Sending the distress relay to coast station on HF bandPush the Enter knob to open the DSC FREQ. menu Compose messageCategory distress transmit sure? Distress relay sel call in progressSending Distress Relay on Behalf of a Ship in Distress Sending distress relay to coast stationPush the Enter knob to open the Nature menu Compose message ID in Dist No Info Nature Sinking Sending distress relay to all ships Communicate with the coast stationPush the Enter knob to open the Nature menu Ship in distress and time, manually or automaticallyDistress relay all call in progress Receiving Distress Relay All Ships Receiving Distress Relay from Coast StationThis page intentionally left blank Sending an all ships call CALLING, ReceivingAll Ships Call CALLING, Receiving Receiving an all ships call Sending message by Nbdp Terminal UnitIndividual Call Sending an individual callNBDP-ARQ How to Set Working Frequency, Channel Routine or ships business priorityHow to Set DSC Frequency Press Call key for forced transmission No response! Try calling again? Able acknowledge call receivedUnable acknowledge call received Setting ACQ /SQ key Can send acknowledge Can send Unable AutomaticallySending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Call Type Able Acknowledgement Manually acknowledging individual call with Unable Display changes as below Compose message Group CallSending a group call MHZ Priority Routine COM. Type Telephone COM. Freq Receiving a group call Receiving message by Nbdp Terminal UnitGeographical Area Call Sending a geographical area call↓ 10 → Area 34 N 140 W ↓ 10 → Receiving a geographical area call Neutral Craft Call Sending a neutral craft callSending message by Nbdp Terminal Unit Receiving a neutral craft call Medical Transport Call Sending a medical transport callReceiving a medical transport call Polling Call Sending a polling callCall Type Station ID Polling acknowledge call received Receiving a polling call Automatic replyManual reply After the call is sent the DSC standby screen appearsSending own ships position to other station Position CallFinding position of other station Position call requesting other ship’s position Pos acknowledge call received Automatic reply Position call other ship requests your positionAcknowledge call received Manual reply Pstn Call Sending a Pstn call, receiving acknowledge back ACK BQPush the Enter knob to open the TEL NO. menu Compose message Waiting for acknowledgement Then, one of the following displays appearsUnable acknowledge call received Receiving a Pstn call, sending acknowledge back ACK BQ Shortly thereafter, one of the following messages appears Charge Information Charge Time 00H 12M 34S Opening a log file To view the contents of a file, do the followingLog File Erasing Message Files Preparing TX Calls Preparing Individual CallsEnter file name and number as shown on the next NBDP-FEC COM. Freq No Info DSC FreqHow to Enter File Name and Number Preparing Group Calls Preparing Geographical Area Calls Call Type GROUP6CALL Preparing Pstn Calls Preparing Test Calls Editing before sending Sending Prepared CallsSending without modification Deleting Send Message Files Printing List of Send Message FilesDSC/WATCH Receiver Setup Setting AlarmsAuto Ack Menu Can send acknowledge Can send Unable manually ManuallyPrinting Messages Sample printoutsRoutine frequencies Setting Scan FrequenciesDistress frequencies Local channels International channelsDistress channels Adjusting Volume Volume setupNbdp terminal unit, printer and keyboard Nbdp System OverviewTurning on the Nbdp System Features of the IB-583 Description of EquipmentTerminal unit Communication status displayKeyboard KeyboardFunction Keys, Menu Operation Menu conventionsInverse video UnderlineMenu overview Selecting menusFile menu Selecting menu items and optionsFunction key description Edit menu UndoCut CopyCancel Sending Timer OperationFunction key F3 Operate menu Call StationSetting with ← or → key Function key F4 Window menuWindow menu Displays desired calendar month and year. To changeSelect ID Entry Function key F5 Station menuGroup ID Entry Setup Slave DelayFunction key F6 System menu TX/RX MSG SaveCursor is choosing Window Color Setup press the Enter key Nbdp Preparations Registering Answerback Code & ID CodesRegistering answerback code Answerback code entry screenStation List Registering ID codesMessage for confirmation of code entered ID code screenRegistering stations Station entry screenScanning group list OK/Cancel promptEditing/Deleting stations Timer operation entry screen Timer ProgrammingRegistering timer programs Editing/Deleting timer programs User channel entry screenScan Channel Groups Editing/Deleting user channelsRegistering scan channel groups To quit, press the Esc keyEditing/Deleting scan channel groups Editing channelsAdding channels Deleting channelsNbdp File Operations Opening and Closing FilesCreating Files 10-110-2 Type your message10-3 Saving a FileFormatting floppy disks Close text screen Saving a file10-4 Editing Files Cutting and pasting text10-5 Cutting textCopying and pasting text Select allSearching text 10-6Replacing text Goto line10-7 Replace screenSwitching between files Opening FilesGoto top, Goto bottom Opening a fileRenaming Files Saving a File Under a New NameDeleting Files Real Time PrintingPrinting Files 10-10Nbdp TRANSMITTING, Receiving Manual Calling11-1 Press the 9 key to choose Set Frequency11-2 Manual calling screenARQ Mode Operation 11-3Establishing connection Press the 1 key to choose Call Station11-4 Transmit message by one of the following methodsSending a file stored on a floppy disk Send file screenFEC Mode Operation Choosing Receive Mode11-5 Stopping transmissionCommunications example Communication Example11-6 11-7 Table of abbreviationsTimer Operation Enabling timer operationCommand and abbreviation Timer operation list11-9 Stopping timer operationScanning Communication Buffer Preparing Macrofiles for Automatic TelexAutomatic telex overview 11-10Preparations 11-11Registering answerback code Registering scan groupsCommands Command Parameter ContentCommands processed by Danish coast station Lyngby Command Function11-13 Actual procedure for store-and-forward telexStore-and-forward method Close text prompt 11-14Sample macrofile for store-and-forward method Dirtlx macrofile 11-15Press the Enter key and enter a file name as follows Sample Dirtlx macrofileProcedure for Dirtlx 11-16Automatic Telex using Macrofile Basic procedureActual procedure 11-17Press the ↓ key to choose a macrofile Press the Enter key 11-18Call macro screen 12-1 Maintenance & TroubleshootingDaily Test 12-2 Radiotelephone TestAntenna Coupler Test Maintenance Maintenance check points12-3 Check Point Remedy/RemarksUnit Fuse Replacement of Fuses12-4 Simple Troubleshooting Error MessagesProblem Probable cause Remedy Error message Meaning Remedy12-6 WR1, WR2 PLL unlock Check if the reference oscillator isTest Call 12-712-8 Nbdp Terminal Unit Maintenance Cleaning the equipmentConnectors and earth connection Floppy disk driveDiagnostics General diagnostics12-10 Press the function key F6 to display the System menu12-11 Tone testTone test menu Tone test12-12 Appendix Menu TreeDSC/watch receiver AP-1Radiotelephone AP-2Nbdp terminal unit telex AP-3Frequency Tables DSC frequency tableAP-4 TX kHz RX kHz Remarks File NameCustom channels to be programmed by Furuno dealers AP-5MF band working carrier frequencies ref. US CFR 47 Part AP-6MF band SSB working carrier frequencies AP-7MHz ITU SSB carrier frequencies ITU RR Appendix AP-8AP-9 12/16 ITU SSB carrier frequencies ITU RR Appendix AP-1018/19, 22, 25/26 ITU SSB carrier frequencies ITU RR Appendix AP-11MF band telex frequency table AP-12AP-13 ITU Telex frequency /4AP-14 Frequency /4AP-15 AP-16 ITU Telex Frequency /4Telex Abbreviations AP-17Digital Interface IEC O SentencesAP-18 Input sentences IECZDA Time and date AP-19GLL Geographic position latitude/longitude AP-20 RMA Recommended minimum specific LORAN-C dataAP-21 RMC Recommended minimum specific GPS/TRANSIT dataSchematic diagram AP-22Parts List AP-23Control unit FS-1570/2570 Model FS-1570/2570 UnitModel FS-1570T Unit AP-24Transceiver unit FS-1570T Model FS-2570T Unit AP-25Transceiver unit FS-2570T AP-26 Parts LocationTransceiver unit FS-2570T Transceiver unit FS-1570T AP-27Control unit FS-2570C AP-28Index IN-1IN-2 IndexOffered by Busse-Yachtshop.de Email info@busse-yachtshop.de Offered by Busse-Yachtshop.de Email info@busse-yachtshop.de