Manuals / Sony / Cell Phone / Cell Phone

Sony FS-2570, FS-1570 manual Interpreting Call Displays, Receive calls, Distress receive call

Models: FS-2570 FS-1570

1 222

Download 222 pages 57.34 Kb

Page 45

3 DSC OVERVIEW

3.4 Interpreting Call Displays

This paragraph provides the information necessary for interpreting receive and send call displays.

3.4.1 Receive calls

Below are sample distress and individual receive calls. The content of other types of receive calls is similar to that of the individual call. When you receive a call, the message “INCOMING” flashes at the bottom of the display.

Distress receive call


*	Received message		*
MAR-23-2002-23:59		ECC: OK
DISTRESS CALL

SHIP IN DIST: 123 56789

NATURE: UNDESIGNATED

POS: 12°	123° 5E AT 12:34
TELEPHONE	42182.0 KHZ
ANSWER34N
		ALL VIEW

Push [ENTER] knob to switch.

Date and time of message

ECC (Error Check Character): OK or NG (No Good) Category (Distress call)

Ship in Distress (ID No. of ship in distress)

Nature of Distress (Undesignated, Fire, Flooding,

Collision, Grounding, Listing, Sinking, Disable,

Abandoning, Piracy, Man Overboard, EPIRB emission) Position of ship in distress

Working frequency to use

5Received message

DISTRESS COORDINATES: 12° 34N 123° 45E AT 12:34

TELECOMMAND: J3E TELEPHONE

END OF SEQUENCE: EOS

ERROR-CHECK: OK

DSC FREQUENCY

: 2177.0KHZ

GO TO EASY VIEW

Rotate [ENTER] knob to switch.

Distress coordinates (position of ship in distress)

Telecommand (class of emission)

End of sequence (EOS for distress)

Error check (OK or NG)

DSC frequency used to transmit distress call

Received message

FORMAT	: DISTRESS CALL				Format (distress)

SELF-IDENTITY	: 123456789				ID no. of ship in distress

NATURE OF DISTRESS:					Nature of distress (problem with ship in distress, see above)

UNDESIGNATED DISTRESS
5

3-5

offered by Busse-Yachtshop.de

email: info@busse-yachtshop.de

Image 45

Sony FS-2570, FS-1570 manual Interpreting Call Displays, Receive calls, Distress receive call

Contents

SSB Radiotelephone 00080933800 Distress Alert Calling Procedure Safety Instructions Iii Table of Contents Sending Distress Alert DSC OverviewDSC/WATCH Receiver Setup Nbdp Preparations ViiViii Features ForewordGeneral DSC/watch receiver Program NumberNbdp with optional Nbdp Terminal Unit IB-581/IB-583 PC Board Program No On Display RemarksFS-2570 250 W System ConfigurationXii FS-1570 150 WFS-1570/2570 Specifications of SSB RadiotelephoneDSC/WATCH Keeping Receiver Digital Selective Calling IB-581 IB-583Interface Operational Overview Power switch Turns the power on/offControlsFURUNO Description of controlsPanel Dimmer, LCD Contrast Turning the Power On/OffDSC standby screen IndicationsRadiotelephone screen DSC standby screenLoudspeaker Scanning Routine DSC FrequenciesAutomatic Acknowledge On/Off Manual Entry of Position and Time After last digit Automatic setting of working frequency System CharacteristicsEquipment priority Controls become inoperativePower Supply Unit option AC and DC power switchesPower supply units SSB Radiotelephone TransmittingChoosing class of emission Choosing channel Choosing channel, frequencyChoosing band and band channel with the Enter knob Rotate the Enter knob to set band or channel desiredChoosing frequency TuningEnter frequency by one of the methods below Entering frequency with the numeric keysMonitoring transceiver output power Using the handsetDisplaying IA, IC, VC or RF Reducing transmitter powerReceiving RF gain sensitivity adjustmentMeter Monitoring traffic on intended transmit frequencyNoise blanker Squelch control, squelch frequencySquelch on/off Squelch frequencyTelex Communications IntercomReplace the cover Turn on the control unit When Automatic Tuning FailsRegistering user channels User ChannelsWindow shown below appears Entry is selected push the Enter knobChannels may be registered Press the Cancel key to close the menu FAX Enable/DisableDeleting user channels Deleting individual user channelsSpeaker Setting in Off Hook This page intentionally left blank Call over Public Switched Telephone Network Pstn What is DSC?DSC Overview DSC CallContents of a DSC call Case of Accidental Trans Mission of the Distress Alert Distress alert call and replyBasic procedure radiotelephone Audio AlarmsAlarm Frequency interval Individual callInterpreting Call Displays Receive callsDistress receive call Received message Individual receive callSend calls Distress send callIndividual send call This page intentionally left blank Distress Operations Sending Distress AlertRussian version Distress Operations Rotate Enter knob to scroll Push the Enter knob to open the time input window Push the Enter knob to open the Input Type menuCompose Communicating by Nbdp Terminal Unit Receiving a Distress AlertAction for ship receiving distress alert on MF band Distress alert received on MF bandCompose message Distress acknowledge call in progress Distress alert received on HF bandSending the distress relay to coast station on HF band Action for ships receiving distress alert on HF bandCompose message Push the Enter knob to open the DSC FREQ. menuDistress relay sel call in progress Category distress transmit sure?Sending distress relay to coast station Sending Distress Relay on Behalf of a Ship in DistressPush the Enter knob to open the Nature menu Compose message ID in Dist No Info Nature Sinking Communicate with the coast station Sending distress relay to all shipsShip in distress and time, manually or automatically Push the Enter knob to open the Nature menuDistress relay all call in progress Receiving Distress Relay from Coast Station Receiving Distress Relay All ShipsThis page intentionally left blank CALLING, Receiving All Ships CallSending an all ships call CALLING, Receiving Sending message by Nbdp Terminal Unit Receiving an all ships callSending an individual call Individual CallNBDP-ARQ Routine or ships business priority How to Set Working Frequency, ChannelHow to Set DSC Frequency Press Call key for forced transmission Able acknowledge call received Unable acknowledge call receivedNo response! Try calling again? Can send acknowledge Can send Unable Automatically Setting ACQ /SQ keySending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Call Type Able Acknowledgement Manually acknowledging individual call with Unable Group Call Sending a group callDisplay changes as below Compose message MHZ Priority Routine COM. Type Telephone COM. Freq Receiving message by Nbdp Terminal Unit Receiving a group callSending a geographical area call Geographical Area Call↓ 10 → Area 34 N 140 W ↓ 10 → Receiving a geographical area call Sending a neutral craft call Neutral Craft CallSending message by Nbdp Terminal Unit Receiving a neutral craft call Sending a medical transport call Medical Transport CallReceiving a medical transport call Sending a polling call Polling CallCall Type Station ID Polling acknowledge call received Automatic reply Receiving a polling callAfter the call is sent the DSC standby screen appears Manual replyPosition Call Finding position of other stationSending own ships position to other station Position call requesting other ship’s position Pos acknowledge call received Position call other ship requests your position Acknowledge call receivedAutomatic reply Manual reply Sending a Pstn call, receiving acknowledge back ACK BQ Pstn CallPush the Enter knob to open the TEL NO. menu Compose message Then, one of the following displays appears Waiting for acknowledgementUnable acknowledge call received Receiving a Pstn call, sending acknowledge back ACK BQ Shortly thereafter, one of the following messages appears Charge Information Charge Time 00H 12M 34S To view the contents of a file, do the following Log FileOpening a log file Erasing Message Files Preparing Individual Calls Preparing TX CallsNBDP-FEC COM. Freq No Info DSC Freq Enter file name and number as shown on the nextHow to Enter File Name and Number Preparing Group Calls Preparing Geographical Area Calls Call Type GROUP6CALL Preparing Pstn Calls Preparing Test Calls Sending Prepared Calls Sending without modificationEditing before sending Printing List of Send Message Files Deleting Send Message FilesSetting Alarms DSC/WATCH Receiver SetupCan send acknowledge Can send Unable manually Manually Auto Ack MenuSample printouts Printing MessagesSetting Scan Frequencies Distress frequenciesRoutine frequencies International channels Distress channelsLocal channels Volume setup Adjusting VolumeNbdp System Overview Turning on the Nbdp SystemNbdp terminal unit, printer and keyboard Description of Equipment Features of the IB-583Terminal unit Communication status displayKeyboard KeyboardMenu conventions Function Keys, Menu OperationInverse video UnderlineSelecting menus Menu overviewFile menu Selecting menu items and optionsFunction key description Undo Edit menuCut CopyTimer Operation Cancel SendingFunction key F3 Operate menu Call StationFunction key F4 Window menu Setting with ← or → keyWindow menu Displays desired calendar month and year. To changeFunction key F5 Station menu Group ID EntrySelect ID Entry Slave Delay SetupFunction key F6 System menu TX/RX MSG SaveCursor is choosing Window Color Setup press the Enter key Registering Answerback Code & ID Codes Nbdp PreparationsRegistering answerback code Answerback code entry screenRegistering ID codes Station ListMessage for confirmation of code entered ID code screenStation entry screen Registering stationsOK/Cancel prompt Editing/Deleting stationsScanning group list Timer Programming Registering timer programsTimer operation entry screen User channel entry screen Editing/Deleting timer programsEditing/Deleting user channels Scan Channel GroupsRegistering scan channel groups To quit, press the Esc keyEditing channels Editing/Deleting scan channel groupsAdding channels Deleting channelsOpening and Closing Files Nbdp File OperationsCreating Files 10-1Type your message 10-2Saving a File Formatting floppy disks10-3 Saving a file 10-4Close text screen Cutting and pasting text Editing Files10-5 Cutting textSelect all Copying and pasting textSearching text 10-6Goto line Replacing text10-7 Replace screenOpening Files Switching between filesGoto top, Goto bottom Opening a fileSaving a File Under a New Name Renaming FilesDeleting Files Real Time Printing10-10 Printing FilesManual Calling Nbdp TRANSMITTING, Receiving11-1 Press the 9 key to choose Set FrequencyManual calling screen 11-211-3 ARQ Mode OperationEstablishing connection Press the 1 key to choose Call StationTransmit message by one of the following methods 11-4Sending a file stored on a floppy disk Send file screenChoosing Receive Mode FEC Mode Operation11-5 Stopping transmissionCommunication Example 11-6Communications example Table of abbreviations 11-7Enabling timer operation Timer OperationCommand and abbreviation Timer operation listStopping timer operation Scanning11-9 Preparing Macrofiles for Automatic Telex Communication BufferAutomatic telex overview 11-1011-11 PreparationsRegistering answerback code Registering scan groupsCommand Parameter Content CommandsCommands processed by Danish coast station Lyngby Command FunctionActual procedure for store-and-forward telex Store-and-forward method11-13 11-14 Sample macrofile for store-and-forward methodClose text prompt 11-15 Dirtlx macrofilePress the Enter key and enter a file name as follows Sample Dirtlx macrofile11-16 Procedure for DirtlxBasic procedure Automatic Telex using MacrofileActual procedure 11-1711-18 Call macro screenPress the ↓ key to choose a macrofile Press the Enter key Maintenance & Troubleshooting Daily Test12-1 Radiotelephone Test Antenna Coupler Test12-2 Maintenance check points Maintenance12-3 Check Point Remedy/RemarksReplacement of Fuses 12-4Unit Fuse Error Messages Simple TroubleshootingProblem Probable cause Remedy Error message Meaning RemedyWR1, WR2 PLL unlock Check if the reference oscillator is 12-612-7 Test Call12-8 Cleaning the equipment Nbdp Terminal Unit MaintenanceConnectors and earth connection Floppy disk driveGeneral diagnostics Diagnostics12-10 Press the function key F6 to display the System menuTone test 12-11Tone test menu Tone test12-12 Menu Tree AppendixDSC/watch receiver AP-1AP-2 RadiotelephoneAP-3 Nbdp terminal unit telexDSC frequency table Frequency TablesAP-4 TX kHz RX kHz Remarks File NameAP-5 Custom channels to be programmed by Furuno dealersAP-6 MF band working carrier frequencies ref. US CFR 47 PartAP-7 MF band SSB working carrier frequenciesAP-8 MHz ITU SSB carrier frequencies ITU RR AppendixAP-9 AP-10 12/16 ITU SSB carrier frequencies ITU RR AppendixAP-11 18/19, 22, 25/26 ITU SSB carrier frequencies ITU RR AppendixAP-12 MF band telex frequency tableITU Telex frequency /4 AP-13Frequency /4 AP-14AP-15 ITU Telex Frequency /4 AP-16AP-17 Telex AbbreviationsO Sentences Digital Interface IECAP-18 Input sentences IECAP-19 GLL Geographic position latitude/longitudeZDA Time and date RMA Recommended minimum specific LORAN-C data AP-20RMC Recommended minimum specific GPS/TRANSIT data AP-21AP-22 Schematic diagramAP-23 Parts ListControl unit FS-1570/2570 Model FS-1570/2570 UnitAP-24 Transceiver unit FS-1570TModel FS-1570T Unit AP-25 Transceiver unit FS-2570TModel FS-2570T Unit Parts Location Transceiver unit FS-2570TAP-26 AP-27 Transceiver unit FS-1570TAP-28 Control unit FS-2570CIN-1 IndexIndex IN-2Offered by Busse-Yachtshop.de Email info@busse-yachtshop.de Offered by Busse-Yachtshop.de Email info@busse-yachtshop.de