Manuals / Sony / Cell Phone / Cell Phone

Sony FS-2570, FS-1570 manual Shortly thereafter, one of the following messages appears

Models: FS-2570 FS-1570

1 222

Download 222 pages 57.34 Kb

Page 111

5 CALLING, RECEIVING

5. Shortly thereafter, one of the following messages appears.

PSTN call connected.

TO COAST	: 001234567
TEL NO.	: 1234567890123456

DSC FREQ	:	4208.0KHZ

PSTN call connected

PSTN connection call in progress!

FROM COAST : 001234567

TEL NO. : 1234567890123456

DSC FREQ :	4208.0KHZ
TIME TO GO:	25S

PSTN connection call in progress

PSTN end of call in progress!

TO COAST :		001234567
TEL NO.	:	1234567890123456

DSC FREQ	:	4208.0KHZ
TIME TO GO:		7S

PSTN end of call

6.Do one of the following depending on the message shown at step 5. PSTN call connected: Your phone rings; communicate with party.

PSTN connection call in progress!: If the channel assigned is appropriate, the message “Waiting for acknowledgment.” appears. (If the channel cannot be used the message “PSTN end of call in progress!” appears. In this case, start this procedure again.)

PSTN end of call in progress!: The channel could not be used. Press the [CANCEL] key to return to the DSC standby screen.

5.9.3PSTN call disconnection, receiving charge information (ship disconnects line)

1.After hanging up the handset or pressing the [CANCEL] key to complete your call, the display shows the following message.

PSTN end of call in progress!

TO COAST	: 001234567
TEL NO.	: 1234567890123456

DSC FREQ	:	12577.5 KHZ
TIME TO GO:		8S

2. After the call is sent, the following messages appears.

Waiting for charge information.

FROM COAST : 001234567

TEL NO. : 1234567890123456

DSC FREQ :	12577.5 KHZ
TIME TO GO:	20S

3. When the timer counts down to zero one of the following displays appear.

Charge information call received.

CHARGE TIME : 00H 12M 34S

FROM COAST : 001234567

TEL NO. : 1234567890123456

No response! charge information.

FROM COAST : 001234567

TEL NO. : 1234567890123456

STOP ALARM

5-43

offered by Busse-Yachtshop.de

email: info@busse-yachtshop.de

Image 111

Sony FS-2570, FS-1570 manual Shortly thereafter, one of the following messages appears

Contents

SSB Radiotelephone 00080933800 Distress Alert Calling Procedure Safety Instructions Iii Table of Contents Sending Distress Alert DSC OverviewDSC/WATCH Receiver Setup Nbdp Preparations ViiViii Features ForewordGeneral PC Board Program No On Display Remarks Program NumberDSC/watch receiver Nbdp with optional Nbdp Terminal Unit IB-581/IB-583FS-2570 250 W System ConfigurationXii FS-1570 150 WFS-1570/2570 Specifications of SSB RadiotelephoneDSC/WATCH Keeping Receiver Digital Selective Calling IB-581 IB-583Interface Description of controls Power switch Turns the power on/offOperational Overview ControlsFURUNOPanel Dimmer, LCD Contrast Turning the Power On/OffDSC standby screen IndicationsDSC standby screen Radiotelephone screenLoudspeaker Scanning Routine DSC FrequenciesAutomatic Acknowledge On/Off Manual Entry of Position and Time After last digit Controls become inoperative System CharacteristicsAutomatic setting of working frequency Equipment priorityPower Supply Unit option AC and DC power switchesPower supply units SSB Radiotelephone TransmittingChoosing class of emission Rotate the Enter knob to set band or channel desired Choosing channel, frequencyChoosing channel Choosing band and band channel with the Enter knobEntering frequency with the numeric keys TuningChoosing frequency Enter frequency by one of the methods belowMonitoring transceiver output power Using the handsetDisplaying IA, IC, VC or RF Reducing transmitter powerMonitoring traffic on intended transmit frequency RF gain sensitivity adjustmentReceiving MeterSquelch frequency Squelch control, squelch frequencyNoise blanker Squelch on/offTelex Communications IntercomReplace the cover Turn on the control unit When Automatic Tuning FailsEntry is selected push the Enter knob User ChannelsRegistering user channels Window shown below appearsChannels may be registered Deleting individual user channels FAX Enable/DisablePress the Cancel key to close the menu Deleting user channelsSpeaker Setting in Off Hook This page intentionally left blank DSC Call What is DSC?Call over Public Switched Telephone Network Pstn DSC OverviewContents of a DSC call Case of Accidental Trans Mission of the Distress Alert Distress alert call and replyIndividual call Audio AlarmsBasic procedure radiotelephone Alarm Frequency intervalInterpreting Call Displays Receive callsDistress receive call Received message Individual receive callSend calls Distress send callIndividual send call This page intentionally left blank Distress Operations Sending Distress AlertRussian version Distress Operations Rotate Enter knob to scroll Push the Enter knob to open the time input window Push the Enter knob to open the Input Type menuCompose Communicating by Nbdp Terminal Unit Receiving a Distress AlertAction for ship receiving distress alert on MF band Distress alert received on MF bandCompose message Distress acknowledge call in progress Distress alert received on HF bandSending the distress relay to coast station on HF band Action for ships receiving distress alert on HF bandCompose message Push the Enter knob to open the DSC FREQ. menuDistress relay sel call in progress Category distress transmit sure?Sending distress relay to coast station Sending Distress Relay on Behalf of a Ship in DistressPush the Enter knob to open the Nature menu Compose message ID in Dist No Info Nature Sinking Communicate with the coast station Sending distress relay to all shipsShip in distress and time, manually or automatically Push the Enter knob to open the Nature menuDistress relay all call in progress Receiving Distress Relay from Coast Station Receiving Distress Relay All ShipsThis page intentionally left blank CALLING, Receiving All Ships CallSending an all ships call CALLING, Receiving Sending message by Nbdp Terminal Unit Receiving an all ships callSending an individual call Individual CallNBDP-ARQ Routine or ships business priority How to Set Working Frequency, ChannelHow to Set DSC Frequency Press Call key for forced transmission Able acknowledge call received Unable acknowledge call receivedNo response! Try calling again? Can send acknowledge Can send Unable Automatically Setting ACQ /SQ keySending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Call Type Able Acknowledgement Manually acknowledging individual call with Unable Group Call Sending a group callDisplay changes as below Compose message MHZ Priority Routine COM. Type Telephone COM. Freq Receiving message by Nbdp Terminal Unit Receiving a group callSending a geographical area call Geographical Area Call↓ 10 → Area 34 N 140 W ↓ 10 → Receiving a geographical area call Sending a neutral craft call Neutral Craft CallSending message by Nbdp Terminal Unit Receiving a neutral craft call Sending a medical transport call Medical Transport CallReceiving a medical transport call Sending a polling call Polling CallCall Type Station ID Polling acknowledge call received Automatic reply Receiving a polling callAfter the call is sent the DSC standby screen appears Manual replyPosition Call Finding position of other stationSending own ships position to other station Position call requesting other ship’s position Pos acknowledge call received Position call other ship requests your position Acknowledge call receivedAutomatic reply Manual reply Sending a Pstn call, receiving acknowledge back ACK BQ Pstn CallPush the Enter knob to open the TEL NO. menu Compose message Then, one of the following displays appears Waiting for acknowledgementUnable acknowledge call received Receiving a Pstn call, sending acknowledge back ACK BQ Shortly thereafter, one of the following messages appears Charge Information Charge Time 00H 12M 34S To view the contents of a file, do the following Log FileOpening a log file Erasing Message Files Preparing Individual Calls Preparing TX CallsNBDP-FEC COM. Freq No Info DSC Freq Enter file name and number as shown on the nextHow to Enter File Name and Number Preparing Group Calls Preparing Geographical Area Calls Call Type GROUP6CALL Preparing Pstn Calls Preparing Test Calls Sending Prepared Calls Sending without modificationEditing before sending Printing List of Send Message Files Deleting Send Message FilesSetting Alarms DSC/WATCH Receiver SetupCan send acknowledge Can send Unable manually Manually Auto Ack MenuSample printouts Printing MessagesSetting Scan Frequencies Distress frequenciesRoutine frequencies International channels Distress channelsLocal channels Volume setup Adjusting VolumeNbdp System Overview Turning on the Nbdp SystemNbdp terminal unit, printer and keyboard Communication status display Features of the IB-583Description of Equipment Terminal unitKeyboard KeyboardUnderline Function Keys, Menu OperationMenu conventions Inverse videoSelecting menu items and options Menu overviewSelecting menus File menuFunction key description Copy Edit menuUndo CutCall Station Cancel SendingTimer Operation Function key F3 Operate menuDisplays desired calendar month and year. To change Setting with ← or → keyFunction key F4 Window menu Window menuFunction key F5 Station menu Group ID EntrySelect ID Entry TX/RX MSG Save SetupSlave Delay Function key F6 System menuCursor is choosing Window Color Setup press the Enter key Answerback code entry screen Nbdp PreparationsRegistering Answerback Code & ID Codes Registering answerback codeID code screen Station ListRegistering ID codes Message for confirmation of code enteredStation entry screen Registering stationsOK/Cancel prompt Editing/Deleting stationsScanning group list Timer Programming Registering timer programsTimer operation entry screen User channel entry screen Editing/Deleting timer programsTo quit, press the Esc key Scan Channel GroupsEditing/Deleting user channels Registering scan channel groupsDeleting channels Editing/Deleting scan channel groupsEditing channels Adding channels10-1 Nbdp File OperationsOpening and Closing Files Creating FilesType your message 10-2Saving a File Formatting floppy disks10-3 Saving a file 10-4Close text screen Cutting text Editing FilesCutting and pasting text 10-510-6 Copying and pasting textSelect all Searching textReplace screen Replacing textGoto line 10-7Opening a file Switching between filesOpening Files Goto top, Goto bottomReal Time Printing Renaming FilesSaving a File Under a New Name Deleting Files10-10 Printing FilesPress the 9 key to choose Set Frequency Nbdp TRANSMITTING, ReceivingManual Calling 11-1Manual calling screen 11-2Press the 1 key to choose Call Station ARQ Mode Operation11-3 Establishing connectionSend file screen 11-4Transmit message by one of the following methods Sending a file stored on a floppy diskStopping transmission FEC Mode OperationChoosing Receive Mode 11-5Communication Example 11-6Communications example Table of abbreviations 11-7Timer operation list Timer OperationEnabling timer operation Command and abbreviationStopping timer operation Scanning11-9 11-10 Communication BufferPreparing Macrofiles for Automatic Telex Automatic telex overviewRegistering scan groups Preparations11-11 Registering answerback codeCommand Function CommandsCommand Parameter Content Commands processed by Danish coast station LyngbyActual procedure for store-and-forward telex Store-and-forward method11-13 11-14 Sample macrofile for store-and-forward methodClose text prompt Sample Dirtlx macrofile Dirtlx macrofile11-15 Press the Enter key and enter a file name as follows11-16 Procedure for Dirtlx11-17 Automatic Telex using MacrofileBasic procedure Actual procedure11-18 Call macro screenPress the ↓ key to choose a macrofile Press the Enter key Maintenance & Troubleshooting Daily Test12-1 Radiotelephone Test Antenna Coupler Test12-2 Check Point Remedy/Remarks MaintenanceMaintenance check points 12-3Replacement of Fuses 12-4Unit Fuse Error message Meaning Remedy Simple TroubleshootingError Messages Problem Probable cause RemedyWR1, WR2 PLL unlock Check if the reference oscillator is 12-612-7 Test Call12-8 Floppy disk drive Nbdp Terminal Unit MaintenanceCleaning the equipment Connectors and earth connectionPress the function key F6 to display the System menu DiagnosticsGeneral diagnostics 12-10Tone test 12-11Tone test Tone test menu12-12 AP-1 AppendixMenu Tree DSC/watch receiverAP-2 RadiotelephoneAP-3 Nbdp terminal unit telexTX kHz RX kHz Remarks File Name Frequency TablesDSC frequency table AP-4AP-5 Custom channels to be programmed by Furuno dealersAP-6 MF band working carrier frequencies ref. US CFR 47 PartAP-7 MF band SSB working carrier frequenciesAP-8 MHz ITU SSB carrier frequencies ITU RR AppendixAP-9 AP-10 12/16 ITU SSB carrier frequencies ITU RR AppendixAP-11 18/19, 22, 25/26 ITU SSB carrier frequencies ITU RR AppendixAP-12 MF band telex frequency tableITU Telex frequency /4 AP-13Frequency /4 AP-14AP-15 ITU Telex Frequency /4 AP-16AP-17 Telex AbbreviationsInput sentences IEC Digital Interface IECO Sentences AP-18AP-19 GLL Geographic position latitude/longitudeZDA Time and date RMA Recommended minimum specific LORAN-C data AP-20RMC Recommended minimum specific GPS/TRANSIT data AP-21AP-22 Schematic diagramModel FS-1570/2570 Unit Parts ListAP-23 Control unit FS-1570/2570AP-24 Transceiver unit FS-1570TModel FS-1570T Unit AP-25 Transceiver unit FS-2570TModel FS-2570T Unit Parts Location Transceiver unit FS-2570TAP-26 AP-27 Transceiver unit FS-1570TAP-28 Control unit FS-2570CIN-1 IndexIndex IN-2Offered by Busse-Yachtshop.de Email info@busse-yachtshop.de Offered by Busse-Yachtshop.de Email info@busse-yachtshop.de