Sony FS-1570, FS-2570 manual Editing/Deleting timer programs, User channel entry screen

9 NBDP PREPARATIONS

11.To enter another timer program, press the [Enter] key twice and the repeat steps 3-10.

12.Press the [Esc] key to finish.

9.3.2 Editing/Deleting timer programs

1.Press the function key [F5] and the [2] key.

2.Choose a timer program name from the Timer Operation List.

3.Press the [→ ] key to choose Change and press the [Enter] key.

4.Do one of the following;

Edit program: Use [↑ ], [↓ ] and the [Backspace] key to make corrections.

Delete program: Erase operation name with the [Backspace] key.

5.Press the [Enter] key twice.

6.Press the [Esc] key.

9.4 User Channels

The user channel list provides storage for up to 100 user channels, numbered 0-99. Note that user channels may be used in channel scanning.

9.4.1 Registering user channels

1.Press the function key [F5] and then the [4] key to show the User Channel Entry screen.

User Channel Entry

Channel List

Create

Change

		Channel Set Up
Channel		: _
Tx	Freq	:	0.00
Rx	Freq	:	0.00

User channel entry screen

2.If Create is not underlined, press [→ ], [↑ ] and the [Enter] key to underline it.

3.Channel is selected. Enter channel number. (100 channels may be registered. When you attempt to register more, the message “Channel memory is full. Press any key to escape.” appears. In this case delete unnecessary channels to register new ones.)

4.Press the [↓ ] key to choose “Tx Freq.” Enter TX frequency.

5.Press the [↓ ] key to choose “Rx Freq.” Enter RX frequency.

6.Press the [Enter] key. The”OK/Cancel” confirmation window appears.

7.Press the [Enter] key. Channel number entered appears in the Channel List. (If the channel entered already exists, the message “Channel by that number already exists. Press any key to escape.” appears. Press any key and then reenter number.)

9-6

offered by Busse-Yachtshop.de email: info@busse-yachtshop.de