Sony FS-1570, FS-2570 11-4, Transmit message by one of the following methods, Send file screen

11 NBDP TRANSMITTING, RECEIVING

5.Transmit message by one of the following methods:

Sending a file stored on a floppy disk

a)Press the function key [F7] (WRU) to receive the answerback code of the other station. Verify that the code from the station called is correct.

b)Press the function key [F8] (HR) to transmit your own identity (answerback code).

c)Press the function key [F3] and then the [3] key to display the Send screen. Choose file to send and press the [Enter] key. Press the [Enter] key again, and “Send” appears in reverse video while the file is being transmitted.

			Send File
[B:\TEST1.						]
	File name			Size	Date & Time
		52			02-10-15 17:25
LOG File
TEST1.		120			02-10-10 16:30
TEST2.		151			02-10-11	09:25
TEST3.		180			02-10-11	20:16
NBDP		169			02-10-12	06:23

[		End of Directory		]
4	Files exist	1454000		bytes free
To select : ENTER To view : SPACE			To	quit : ESC

Send file screen

Sending volume (percentage of message transmitted, counts upward as the message is being transmitted), ARQ error count and ARQ transmission time appear on the display. “Lock” appears in reverse video when the mark and space signals in the receive signal are normal. “Sending Volume” shows what percentage of the message has been sent. “ARQ Error” shows the number of times error was found during transmission. “ARQ Time” is the time in seconds the communication line has been established.

1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break

						2002-09-08 2:14:28 UTC		Caps-Eng
Station Name	:						HT
Frequency (T/R)	:	8765.00	/ 8965.00(kHz)			Comm Mode :ARQ
Comm Status	:	Connect	Send	Lock	Error
Sending Volume	:	100(%)	ARQ Error : 0			ARQ Time : 0(sec)

Communication status display

Type a message from the keyboard

After exchanging answerback code by the function key [F7] (WRU) and [F8] (HR), type your message directly from the keyboard.

a)To change direction of traffic, press either function key [F9] (OVER), or [+] and [?]. Then, the other station becomes the information sending station, your station the information receiving station.

b)Receive a message from the sending station, if any.

c)After completion of communication, press the function key [F7] (WRU) key to receive the answerback code of the other station and then press the function key [F8] (HR) to transmit your own answerback code.

d)Press the function key [F10] (Break) to disconnect the line.

11-4

offered by Busse-Yachtshop.de email: info@busse-yachtshop.de