Making and Receiving Calls
Making a Call
1.Enter the area code and phone number. The phone number is shown in the display.
If the number is longer than 12 characters, the be- ginning of the number will be shown as an arrow (see Figure 8).
Figure 8. Number with more than 12 characters.
To erase a digit, press CLR. To erase the entire phone number, press and hold down CLR for a cou- ple of seconds.
2.Press YES to make the call. The display shows Calling, followed by Connecting and the phone icon is lit.
Ending a Call
•Press NO to end the call.
Making an International Call
1.Press and hold the zero key until the international + prefix is displayed.
2.Enter the country code, area code (without any leading zero) and the phone number.
3.Press YES to make the call.
Making an Emergency Call
•Enter 112 (The international emergency number) and press YES.
The 112 emergency number can be used in any country with or without a SIM Card, provided a GSM network is within range.
Note! Some operators may require that a SIM Card has been inserted into the phone and that the PIN code has been entered.
Retry Function
If the call connection fails or if the number you are trying to reach is busy, the display shows Retry?. Press YES to
If you press YES, the number will automatically be re- dialled until the call is answered, or 10 times at the most. If you press any key, or you receive a call, the
If the
Receiving a Call
When you receive a call, the phone rings and the indi- cator light on the top of the phone blinks green rap- idly. The display shows Answer?
Answering a Call
•Press YES to answer the call
•When the call is finished, press NO
Note! Always answer the call before placing the ear- piece to your ear. If the ring signal is loud it could damage your hearing.
Rejecting a Call
•Press NO when the phone rings. The display now looks like this:
BusyTone
If the caller's network supports it, the caller will hear a busy tone.
If you have been unable to answer, or you have re- jected a call, the number of the unanswered call will be shown in the MissedCall menu.
Putting a Call on Hold
Press YES to put a call on hold.
To put the call off hold, press YES again.
8 | LZT 126 1352/x R1B |
