Adjusting the color | Resetting to the factory- |
temperature | preset levels |
The adjustment data becomes the common setting for all input signals received.
1Press the 
button.
The “COLOR” OSD appears.
COLOR
COLOR TEMPERATURE
50 00K | 6500K | 9300K | |
VAR I ABLE |
|
| |
|
|
|
|
SELECT | SET / ADJUST | ||
2Press the >?//buttons to select a color temperature.
The factory settings are: 5000K, 6500K, 9300K
Adjusting the color temperature
Press the ¬./>button to select “VARIABLE,” and adjust by pressing the >?//button.
The figure of the adjusted color temperature changes.
The OSD automatically disappears after about 30 seconds. To turn off the OSD, press the 
button again.
To reset, press the ? (reset) button while the OSD is on. The selected color tempetarure is reset. The adjustments you made in the expert mode (page 14) are also reset.
1Press the button of the OSD you want to reset to the factory setting.
2When the parameters are arranged in vertical row in
the OSD, select a parameter you want to reset by pressing the ¬./>buttons.
3Press the ? (reset) button.
Resetting all adjustment data
When there is no OSD displayed, press and hold the ?
(reset) button for more than two seconds.
All adjustment data including the brightness and contrast are reset to
Resetting the picture size, position, moire, and geometry* at the same time
When there is no OSD displayed, press and hold the ?
(reset) button for one second.
The above items of the current input signal are reset to
* The ”Rotation” adjustment (pages 9, 13) is not reset.
EN
F
D
ES
I
J
11
