Table of Contents
Precautions | 3 |
Getting Started | 4 |
Selecting the Input Signal | 4 |
Functions of Controls | 5 |
Selecting the OSD Language | 7 |
Changing the OSD Position | 7 |
Operating the OSD | 7 |
Adjustments (Normal mode) | 8 |
Adjustments (Expert mode) | 12 |
Control Lock Function | 15 |
Degaussing the Screen | 15 |
Plug & Play | 16 |
Damper Wire | 16 |
Power Saving Function | 16 |
Input Signal Warning Function | 17 |
Use of the | 17 |
Specifications | 17 |
Troubleshooting | 18 |
Precautions
Installation
•Prevent internal heat
•Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.
•Do not place the unit near equipment which generates magnetism, such as a converter or high voltage power lines.
Maintenance
•Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such as alcohol or benzine.
•Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a ballpoint pen or a screwdriver. This type of contact may result in a scratched picture tube.
Transportation
When you transport this monitor for repairing or shipping, use the original carton box and packing materials.
Warning on power
connection
•Use a proper power cord for your local power supply.
Examples of plug shapes
for 100 to 120 V AC | for 200 to 240 V AC |
•Before disconnecting the power cord, wait for at least 30 seconds after turning off the power to allow the static electricity on the CRT display surface to discharge.
•After the power has been turned on, the CRT is demagnetized for approximately five seconds. This generates a strong magnetic field around the bezel, which may affect the data stored on magnetic tapes or disks near the bezel. Place such magnetic recording equipment and tapes/disks away from this unit.
The
EN
F
D
ES
I
J
3
