Sony HCD-PX333 specifications Test Mode Displays, Meanings of Other Displays

HCD-PX333

7. TEST MODE DISPLAYS

Each time the [CD SYNC HIGH] button is pressed, the display changes in the following order.

When CPLAY or CREC are started, the display will forcibly be switched to the error rate display as the initial mode.

1. Mode display

Displays “TEMP ADJUST” (C03), “CPLAY2MODE” (C36), etc.

2. Error rate display

Displays the error rate in the following way.

C = AD = )

C = : Indicates the C1 error.

AD = : Indicates ADER.

3. Address display

The address is displayed as follows. (MO: recordable disc, CD: playback only disc)

h =	s =	(MO pit and CD)
h =	a =	(MO groove)

h = : Indicates the header address.

s = : Indicates the SUBQ address.

a = : Indicates the ADIP address.

Note: “–” is displayed when servo is not imposed.

MEANINGS OF OTHER DISPLAYS

Mode display

Error rate display

Address display

Auto gain display (Not used in servicing)

Detrack check display (Not used in servicing)

IVR display (Not used in servicing)

C1 error and jitter display (Not used in servicing)

AD error and jitter display (Not used in servicing)

	Display		Contents
		When Lit		When Off
2		Servo ON		Servo OFF
4		Tracking servo OFF		Tracking servo ON
		Recording mode ON		Recording mode OFF
REC
SYNC, TRACK		CLV low speed mode		CLV normal mode
L.SYNC		ABCD adjustment completed
PROGRAM		Tracking offset cancel ON		Tracking offset cancel OFF
		Tracking auto gain OK
TOC
REPEAT		Focus auto gain OK
SF EDIT		Pit		Groove
DISC		High reflection		Low reflection
NORM		CLV S		CLV A
MONO		CLV LOCK		CLV UNLOCK

35