HCD-PX333
SECTION 4
TEST MODE
Note 1: About “R”
As this unit has only a few buttons, some operations require the use of remote commander
Example: MENU/NO “R” ...Press the [MENU/NO] button of the remote commander.
Note 2: Incorrect operations may be performed if the MD test mode is not entered properly.
In this case, press the ?/1 button to turn the power off, and retry to enter the MD test mode.
MC COLD RESET
•The cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer.
Procedure:
1.Press the ?/1 button to turn the power on.
2.Press three buttons of
3.The set is reset, and displays “See you”, then becomes standby status.
AMP TEST
Procedure:
1.Press the ?/1 button to turn the power on.
2.Press three buttons of .m TUNING
3.Each buttons are pressed, it changes display as follows.
Button | Display |
|
|
x (CD) | 7[TESTMIN] |
|
|
REC MODE | 8[TESTMID] |
|
|
x (MD) | 9[TESTMAX] |
|
|
4.Press the [VOLUME +] button, the display switches “VOLUME 21” to “VOLUME MAX”. And the display returns to the original display after a few second.
5.Press the [VOLUME
6.To release from this mode, press the ?/1 button to turn the power off and cold reset.
VERSION DISPLAY
Procedure:
1.Press the ?/1 button to turn the power on.
2.Press three buttons of .m TUNING
3.Enter the version display mode and STR version is shown in the upper position, the distination is shown in the lower position
4.Each time the x (MD) button is pressed, it changes display STR version → CD version → MD version → STR version → ...
5.To release from this mode, press the ?/1 button to turn the power off.
LCD AND LED TEST
Procedure:
1.Press the ?/1 button to turn the power on.
2.Press three buttons of .m TUNING
3.Liquid crystal display and LEDs are all turned on.
4.Each time the x (MD) button is pressed, it changes display all turned on → all turned off → pattern 1 → pattern 2 → all turned on → ...
5.Each time the x (CD) button is pressed, it changes LED indication all turned on → all turned off → “?/1” → “REC” → “N” (MD) → “X” (MD) → “N” (CD) → “X” (CD) → all turned on → ...
6.To release from this mode, press the ?/1 button to turn the power off.
PATTERN 1
CD
OVER
TRACK
|
|
| PRESET |
|
TOC |
| SHUFFLE | 1 | |
|
| |||
DBFB |
| SYNC | IT HCMS | |
PATTERN 2
|
|
|
|
|
|
|
|
|
|
|
|
|
| MD | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| OVER | |
|
|
| DISC |
| MANUAL | AUTO |
|
|
|
|
|
|
| ||
|
|
|
|
|
| TUNED |
|
| MONO |
| |||||
cDAILY cREC 2 |
|
|
|
| PROGRAM REPEAT |
|
|
|
| 1 3 SLEEP | |||||
| TEXT |
|
|
|
|
|
| ||||||||
| 2 MONO |
|
| S.F EDIT |
|
| NORM |
| LP 4 | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KEY TEST
Procedure:
1.Press the ?/1 button to turn the power on.
2.Press three buttons of .m TUNING
3.Enter the key test mode and display “KEY00”.
4.Each time a button is pressed, “KEY” value increases. However, once a button is pressed, it is no longer taken into account.
5.To release from this mode, press three buttons in the same manner as step 2 , or disconnect the power cord.
31
