Preparing for Surround Modes

The receiver memorizes two types of Surround modes adjustments; one for Dolby Pro Logic and the other for Theater Surround.

To do the adjustment procedure, use the remote control.

English

Notes:

• When you select “DVD MULTI”

as the source to play, you

cannot select the Surround

From the remote control:

1.Press SURROUND MODE until “PRO LOGIC” or “THEATER” appears on the display.

When “PRO LOGIC” is selected, the PRO LOGIC indicator also lights up on the display.

When “THEATER” is selected, the PRO LOGIC, DSP and THEATER indicators also light up on the display. Each time you press the button, the DSP modes change as follows:

SURROUND

MODE

modes.

• The Surround mode is not

used with the other DSP

modes such as the DAP mode

and 3D-PHONIC mode. When

the Surround mode is turned

on, the other DSP mode, if

used, will be turned off.

PRO LOGIC THEATER LIVE CLUBDANCE CLUB HALL

OFF

 

 

 

 

 

 

PAVILION

 

 

 

3D THEATER

 

3D DRAMA

 

3D ACTION

 

HEADPHONE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PRO LOGIC:

Select this mode to watch a video source with Dolby Surround.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THEATER:

Select this mode to watch a video source with Dolby Surround.

 

 

 

 

 

This is JVC original surround mode and gives you the feeling of

 

 

 

 

 

a movie theater.

 

 

 

 

 

 

OFF:

No DSP mode is applied.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For the other modes, see pages 39 and 41.

If you need to make any adjustment, go to the following steps.

2. Press SOUND CONTROL.

SOUND

 

CONTROL

10 keys are activated for sound adjustments.

3.Press TEST to start checking the speaker output balance.

“TEST TONE L” starts flashing on the display, and a test tone comes out of the speakers in the following order:

TEST TONE L

 

TEST TONE C

(Left front speaker)

 

(Center speaker)

TEST

4

TEST TONE R

(Right front speaker)

Notes:

No test tone comes out of the

 

center speaker when

 

“CENTER SPK” is set to

 

“NONE” (see page 24).

No test tone comes out of the

 

rear speakers when “REAR

 

SPK” is set to “NO” (see page

 

 

 

TEST TONE S

 

 

 

 

 

(Rear speakers)

 

 

L C R

The speaker indicators also light on the display while the test tone

 

 

comes out of the speakers.

SL: Lights when the test tone comes out of the left front speaker.

C:Lights when the test tone comes out of the center speaker.

R:Lights when the test tone comes out of the right front speaker.

S:Lights when the test tone comes out of the rear speakers.

Continued to the next page.

25).

44

Page 49
Image 49
JVC RX-774RBK manual Preparing for Surround Modes, No DSP mode is applied For the other modes, see pages 39