On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

English

Notes:

• When you select “DVD MULTI”

as the source to play, you

cannot select the Surround

modes.

1.For Dolby Pro Logic:

Press DOLBY SURROUND so that the lamp on the button lights up and “PRO LOGIC” appears on the display.

The PRO LOGIC indicator also lights up.

Each time you press the button, the Dolby Pro Logic mode turns on and off.

For Theater Surround:

1)Press DSP MODE.

The current DSP mode appears on the display.

2)Turn MULTI JOG until “THEATER” appears on the display, while the indication of the previous step is still on the display.

The PRO LOGIC, DSP and THEATER indicators also light up on the display.

As you turn it, the DSP modes change as follows:

DOLBY SURROUND

DSP MODE

MULTI JOG

• The Surround mode is not

used with the other DSP

modes such as the DAP mode

and 3D-PHONIC mode. When

the Surround mode is turned

on, the other DSP mode, if

used, will be turned off.

 

 

 

THEATER

 

 

 

LIVE CLUB

 

 

DANCE CLUB

 

HALL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DSP OFF

 

 

 

 

 

 

 

 

 

 

PAVILION

 

 

3D THEATER

 

3D DRAMA

 

 

3D ACTION

 

HEADPHONE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you need to make any adjustment, go to the following steps.

2.If necessary, adjust the center speaker output level as follows.

1)Press BALANCE/SURROUND ADJUST repeatedly until “CENTER LEVEL” appears on the display.

The display changes to show the current setting.

2)Turn MULTI JOG to adjust the center speaker output level (from –10 dB to +10 dB), while the indication of the previous step is still on the display.

3.If necessary, adjust the rear speaker output level as follows.

1)Press BALANCE/SURROUND ADJUST repeatedly until “REAR LEVEL” appears on the display.

The display changes to show the current setting.

2)Turn MULTI JOG to adjust the rear speaker output level (from –10 dB to +10 dB), while the indication of the previous step is still on the display.

BALANCE/SURROUND

ADJUST

MULTI JOG

Note:

You cannot adjust the center speaker level when “CENTER SPK” is set to “NONE” (see page 24).

Notes:

You cannot adjust the left and right rear speaker output level separately.

You cannot adjust the rear speaker level when “REAR SPK” is set to “NO” (see page 25).

Continued to the next page.

46

Page 51
Image 51
JVC RX-774RBK manual For Dolby Pro Logic