JVC RX-774RBK manual Assigning Names to Preset Stations, To erase the input characters

Assigning Names to Preset Stations

You can assign a name of up to four characters to each preset station. When a preset station is tuned in, its assigned name will appear on the display.

On the front panel only:

1.Tune in a preset station. See page 28 for details.

TUNER/SEA MEMORY

English

2.Press TUNER/SEA MEMORY.

The preset channel number starts flashing for about 5 seconds.

3.Press TUNER PRESET, while the preset channel number is flashing.

The first character position starts flashing.

CH–

4.Turn MULTI JOG to select a character, while the first character position is flashing.

You can use characters listed below.

CH–

5.Press TUNER PRESET, while a character you want is flashing.

The next (or previous) character position starts flashing.

TUNER PRESET

MULTI JOG

TUNER PRESET

Note:

If you turn MULTI JOG while the preset channel number is flashing, you can change

the preset channel number.

Note on step 3 to 7:

You cannot select any entry after the indication on the display stops flashing.

In this case, repeat the procedure from step 2 again.

CH–

6. Repeat steps 4 and 5 to enter up to four characters.

7. Press TUNER/SEA MEMORY while the last selected	TUNER/SEA MEMORY
character is flashing after you have assigned a name.

To erase the input characters

Insert spaces using the same procedure described above.

MULTI JOG

Available characters

Space
	A B C D E F G H I J K L M N O
P Q R S T					U V W X Y Z 0 1 2 3 4
5	6	7	8	9

30